Canon MX860 Service Manual page 48

MX860 / MX868
4. ADJUSTMENT / SETTINGS
4-1. User Mode
Function
Nozzle check pattern printing
Print head manual cleaning
Print head deep cleaning
Manual print head alignment
Print head alignment value
printing
Paper feed roller cleaning
Bottom plate cleaning
LAN resetting
LAN setting information
display
LAN user data settings
FAX number printing
Procedures
Perform via the machine operation panel, or
from the MP driver Maintenance tab.
- Cleaning both Black and Color:
Perform via the machine operation panel.
- Cleaning Black or Color separately, or both
Black and Color:
Perform from the MP driver Maintenance
tab.
Perform via the machine operation panel, or
from the MP driver Maintenance tab.
Perform via the machine operation panel, or
from the MP driver Maintenance tab.
Perform via the machine operation panel, or
from the MP driver Maintenance tab.
Perform via the machine operation panel, or
from the MP driver Maintenance tab.
Perform via the machine operation panel, or
from the MP driver Maintenance tab.
Perform via the machine operation panel, or
using IJ Network Tool.
Perform via the machine operation panel, or
using IJ Network Tool.
Perform via the machine operation panel.
Perform via the machine operation panel.
Set a sheet of plain paper (A4 or Letter) in the
cassette, or the rear tray if selected.
Unclogging of the print head nozzles, and
maintenance to keep the print head conditions
good.
If there is a missing portion or white streaks in the
nozzle check pattern printout, perform this
cleaning.
If print head manual cleaning is not effective,
perform this cleaning. Since the deep cleaning
consumes more ink than regular cleaning, it is
recommended to perform deep cleaning only when
necessary.
Set 3 sheets of plain paper (A4 or Letter) in the
cassette, or the rear tray if selected.
Confirmation of the current print head alignment
values.
The paper feed rollers of the selected paper source
(the rear tray or the cassette) rotate while being
pushed to the paper lifting plate. Since the rollers
will wear out in this cleaning, it is recommended
that you perform this only when necessary.
Cleaning of the platen ribs when the back side of
paper gets smeared.
Fold a sheet of plain paper (A4 or Letter) in half
crosswise, then unfold and set it in the rear tray
with the folded ridge facing down. (No paper
feeding from the cassette)
Resetting of the LAN settings to default via the
operation panel (Settings -> Device settings ->
LAN settings -> Reset LAN settings), or using IJ
Network Tool.
Display of the wired / wireless LAN settings on
the LCD, via the operation panel (Settings ->
Device settings -> LAN settings -> LAN setting
list (for wired LAN settings) or WLAN setting
list (for wireless LAN settings)), or using IJ
Network Tool.
Confirmation of the FAX user data settings via the
operation panel (FAX -> Menu -> Print
reports/lists -> User's data list).
Printing of the registered FAX numbers (for
confirmation) via the operation panel (FAX ->
Menu -> Print reports/lists -> Telephone
number list).
45 / 64
TABLE OF CONTENTS
Remarks