Huawei SUN2000-4.95KTL-JPL0 Quick Manual page 2

•
The information in this document is subject to change due to version
upgrades or other reasons. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not
constitute a warranty of any kind, express or implied. You can download
this document by scanning the QR code.
•
Before installing the device, read the user manual carefully to get familiar with product
information and safety precautions.
•
Only qualified and trained electrical technicians are allowed to operate the device. Operation
personnel should understand the composition and working principles of the grid-tied PV power
system and local regulations.
•
Before installing the device, check that the package contents are intact and complete against
the packing list. If any damage is found or any component is missing, contact your dealer.
•
Use insulated tools when installing the device. For personal safety, wear proper personal
protective equipment (PPE).
•
When installing the device or connecting cables, use appropriate tools and take necessary
protective measures to avoid damaging the device during operation.
•
Huawei shall not be liable for any consequences caused by the violation of the storage,
transportation, installation, and operation instructions specified in this document and the user
manual.
Installing a SUN2000-4.95KTL-JPL0
1
Overview
(1) LED indicators
(4) Mounting brackets
(7) DC switch (DC SWITCH)
(10) Ventilation valve
(2) Front panel
(5) Mounting kit
(8) DC input terminals
(PV1+/PV1–)
(11) Communications port (COM)
1
(3) Ground point
(6) Heat sink
(9) DC input terminals
(PV2+/PV2–)
(12) AC output port (AC)
Copyright © Huawei Technologies Co., Ltd. 2019.
All rights reserved.