Huawei SUN2000-4.95KTL-JPL0 Quick Manual page 19

5.7 Connecting the AC Output Power Cable
1. Remove an appropriate length of the
jacket and insulation layer from the AC
output power cable using a wire stripper.
When connecting a stripped cable,
ensure that the exposed insulation layer
is in the enclosure, and the jacket is
outside the enclosure.
2. Crimp OT terminals.
3. Route the cable through the AC output cable hole.
4. Connect the AC output power cable to the U, O, and W terminals on the QF13 circuit
breaker, and use a torque wrench to tighten the bolts.
When using a torque wrench to tighten a bolt, use an M12 wrench to tighten the nut at the same time.
Core wire Insulation layer
18
Jacket