Using Your Coffee Maker - Morphy Richards 162100 Instructions Manual

CM162100 MUK Rev2.qxp_Layout 1 27/07/2018 14:49 Page 5

Using Your Coffee Maker

Open the Water Reservoir Cover
with cold water to your desired level. Do
not overfill.
Use the Coffee Spoon
coffee or coffee beans into the Removable
Permanent Filter (3). We recommend 7g (one
spoon) of coffee per cup. Be careful not to
spill any coffee into the water inlet (8).
Reattach the Lid (1), ensuring the Water Inlet
Tube inserts into the Water Inlet (8). A click
will be heard when the Lid is fitted correctly.
Press the On/Off Button
the Power Indicator Light
button will illuminate.
Replace the Glass Carafe
Maker.
Ensure the Glass Carafe is firmly placed into
its correct position, with the Coffee Dispenser
Valve (12) sitting directly central over the
Carafe Lid (14).
1
(7) and fill
3
(17) to add filter
(24) to switch on,
(10) around the
5
(15) into the Coffee
Press the Lid Release Button
Lid (1). Ensure the Permanent Filter Handle
is locked into its central position. A click will be
heard when fitted correctly.
Press the Coffee Type Selector Button
switch between either coffee beans or ground
coffee. The appropriate icon will show on the
Display Screen (21). We recommend 1 Bean
Strength for 1 cup, and 2 Bean Strength for 2
cups. If the Coffee Type Selector Button is not
pressed, the default setting is 2 Bean Strength.
Press the Start Button (23) to start the brewing
process. To stop the brewing process, press
the Start Button a second time.
At the end of the brewing cycle, the coffee
machine will automatically switch to keep warm
mode. After approximately 30 minutes the
Power Indicator Light (10) will extinguish and
the coffee machine will enter standby.
2
4 8
(2) and lift off the
(4)
4
(22) to
6
5