Table of Contents
Advertisement
6
Use your SoundBar
This section helps you use the SoundBar to play
media from a wide range of sources.
Before you start
•
Make the necessary connections as described
in the user manual.
•
Complete the first-time setup. First-time
setup appears when you turn on the
SoundBar for the first time. If you do not
complete the setup, you are prompted
to complete it each time you turn on the
SoundBar.
•
Switch the TV to the correct source for the
SoundBar.
Adjust the volume
Your SoundBar has incremental volume control.
When you change volume or mute your SoundBar,
one or multiple Volume indicator light up to
indicate the volume level.
•
To increase or decrease volume, press +/-
(Volume).
•
To mute sound, press MUTE.
•
To restore the sound, press MUTE again or
press +/- (Volume).
Choose your sound
This section helps you choose the ideal sound for
your video or music.
Sound mode
Select predefined sound modes to suit your video
or music.
1
Press
repeatedly to select a sound
setting:
•
[Auto]: Automatically select [Movie] or
[Music] based on the sound stream.
•
[Movie]: Enjoy a cinematic audio
experience, specially enhanced for
movies.
•
[Music]: Recreate the original recording
environment of your music, in the studio
or at a concert.
•
[Original]: Experience the original sound
of your movies and music, without added
sound effects.
•
[News]: Hear every word with optimized
speech and clear vocals.
•
[Gaming]: Enjoy thrilling arcade sounds,
ideal for action-packed video games or
loud parties.
2
Press
to confirm.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
1
Press
(Home).
2
Select [Setup], and then press
3
Press the Navigation buttons (up/down) to
select [Audio] > [Auto Volume] > [On].
4
Press
to confirm.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press
repeatedly to select a surround
mode.
•
[Virtual Surround]: Creates a highly
compelling 5.1 channel listening
experience. The sound mode indicator
on the main unit lights up.
•
[Stereo]: Two-channel stereo sound. Ideal
for listening to music.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
Press
+/- or
+/- to change the frequency.
The DTS indicator blinks when you press
or
+/-.
Synchronize picture and sound
If the audio and video are not synchronized, delay
the audio to match the video.
1
Press
(Home).
2
Select [Setup], and then press
3
Press the Navigation buttons (up/down) to
select [Audio] > [Lip Sync], and then press
.
.
+/-
.
EN
13
Advertisement
Table of Contents
