5
Connect your
SoundBar
This section helps you connect your SoundBar
to a TV and other devices. For a comprehensive
interactive guide, see www.connectivityguide.
philips.com.
Note
•
For identification and supply ratings, refer to the
type plate at the back or bottom of the product.
•
Before you make or change any connections,
make sure that all devices are disconnected from
the power outlet.
Subwoofer
Follow the steps below to position and connect
your subwoofer.
Position
Place the subwoofer at least one meter (three
feet) away from your SoundBar, and ten
centimeters away from the wall.
For best results, place your subwoofer as shown
below.
EN
8
Note
•
The SoundBar and the subwoofer automatically
pair up when you switch on the SoundBar and
the subwoofer.
Connectors
Connect other devices to your SoundBar.
Side left
USB
Audio, video or picture input from a USB storage
device.
Back connectors
OPTICAL
AC MAINS~
DIGITAL IN
1
2
3
a
AC MAINS~
Connect to the power supply.
b
(Standby-On)
•
Switch the SoundBar on or to standby.
•
When the SoundBar is in standby, the
standby indicator turns red.
c
DIGITAL IN - OPTICAL
Connect to an optical audio output on the
TV or a digital device.
d
DIGITAL IN - COAXIAL
Connect to a coaxial audio output on the TV
or a digital device.
1
L
R
COAXIAL
AUX
HDMI OUT (ARC)
LAN
AUDIO IN
4
5
6
7