Table of Contents
Advertisement
18
TROUBLESHOOTING/FAULT CODES
Fault
Codes
8 8 8
F.0 1
F.0 2
Condition
Possible Cause
does not
detect
battery.
a battery
connected
Poor clamp
to it.
connection.
A load may be
10 minutes of
battery.
12 V.
Solution
BEFORE
connecting
posts to ensure a
good connection.
meter. If LESS
battery using booster
cables connected to
DO NOT
battery during
battery is rated 12 V
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Eliminator and is the answer not in the manual?
Questions and answers
I have an Eliminator 1500 inverter the LED is flashing 0 to 12 volts which is kicking the lights on and off what would cause this
Eliminator battery charger has reverse polarity light on even thought cables are on correctly. It does not charge battery
The MotoMaster Eliminator battery charger may show a reverse polarity light and not charge the battery despite correct cable connections due to one of the following reasons:
1. Battery Terminal Corrosion or Damage – Corrosion or damage on the battery terminals can interfere with proper electrical contact. Cleaning the terminals with a wire brush may help.
2. Internal Battery Issues – A severely discharged or faulty battery may not allow the charger to detect proper polarity. In this case, testing the battery with a multimeter or consulting a professional is recommended.
3. Charger Malfunction – If the charger itself is faulty, it may incorrectly detect polarity. Checking for any error indicators and referring to the troubleshooting guide can help.
If the issue persists, consulting a professional or referring to the charger’s manual for further troubleshooting is advised.
This answer is automatically generated
I have the same issue, my battery is three yrs old, havent use my car often, when i charge it lit the red light teverse polarity..idk how to fix it..
On a car battery what battery type button do I use normal or agm or gel
The Motomaster Eliminator Ultra battery uses AGM (Absorbent Glass Mat) technology. Therefore, the correct battery type button to use would be AGM.
This answer is automatically generated
We have a moto master Eliminator which we purchased in 2012. We have not kept it up to charge for the past 12 years. We would like to use the unit now but can’t seem to charge it up. Is there any hope for this charger?
What does 3.3 mean on my battery charger
We're can I get a manual. Lost mine
How do I know when my battery is done charging. To many buttons and the screen sa FUL