LaserPerformance Laser Series Rigging Manual

Hide thumbs

page of 15

/ 15
Bookmarks

Quick Links

Download this manual

Enlarged version

LASER

Rigging Guide

Fogh Marine | 416 251-0384 | www.foghmarine.com | info@foghmarine.com

LASER 4.7 LASER RADIAL LASER

Unpacking and Preparation: Laser, Radial & Laser 4.7

Parts of the Laser

Hardware Location

Hardware Installation

Rigging the Traveler

Rigging the Mast

Stepping the Mast

Rigging the Outhaul

Rigging the Clew Tie-down

Rigging the Vang

10.

11.

Rigging the Cunningham

12.

Daggerboard Retainer

Mast Retainer Line

13.

Rigging the Rudder

14.

15.

Mainsheet

Sail Number Application

16.

Installation of Optional Mainsheet Side Cleats

17.

Need help?

Do you have a question about the Laser Series and is the answer not in the manual?

Questions and answers

Summary of Contents for LaserPerformance Laser Series

Page 1 LASER 4.7 LASER RADIAL LASER LASER Rigging Guide Unpacking and Preparation: Laser, Radial & Laser 4.7 Parts of the Laser Hardware Location Hardware Installation Rigging the Traveler Rigging the Mast Stepping the Mast Rigging the Outhaul Rigging the Clew Tie-down Rigging the Vang Rigging the Cunningham Daggerboard Retainer...
Page 2 If you have any questions please contact your dealer or call LaserPerformance Customer Service. Th is is a comprehensive rigging guide for the Standard and Race conﬁ gured Laser. If you have a Laser XD, please refer to the included XD instructions in your XD kit for instructions on XD speciﬁ...
Page 3 1. Unpacking and Preparation: 2. Parts of the Laser Nautical Terminology Standard Delivery Kit Port: Left side of the boat when looking forward Starboard: Right side of the boat when looking forward Gunwale: Upper edge of a boat’s side Leeward: Direction away Sail numbers 10 Large traveler block from the wind...
Page 4 3. Hardware Location Figure A ratchet block eyestrap daggerboard well mast step Th ere are a few pieces of hardware that you will need to install on your new hull before continuing to rig your Laser. Locate the two sets of screws that are positioned on the deck of the boat (ﬁ...
Page 5 clam cleat clam cleat 5. Rigging the Traveler: Rigging the Traveler: Alternative 1 Alternative 2 Port side of the line goes through the clam cleat. Tie off the starboard line with a bowline. port fairlead port starboard fairlead fairlead small traveler block small traveler block Figure B Figure C...
Page 6 7. Stepping the Mast 6. Rigging the Mast Standard and Race Models Standard and Race Models 1. Locate the sail, battens, boom, upper 1. Make sure the bow of the boat is pointing and lower mast from your delivery kit into the wind and that their are No Overhead Remove your sail from the sail bag and Electrical Wires in the Area! Also make sure...
Page 7: Check The Items In The Pack And Lay Them On The Deck (Fi Gure
8. Rigging the Outhaul: Laser Standard Models Rigging the Outhaul: Laser Race Models 1. Locate the outhaul line from the deliv- 1.Check the items in the pack and lay them on ery kit line bag. Tie a bowline with the the deck (ﬁ...
Page 8 9. Rigging the Clew Tie Down: Laser Race Models Rigging the Outhaul: Laser Race Models 1. Locate the clew tie down line from the 1.Now we can attach the sail to the boom with delivery kit line bag. the hook as shown (ﬁ gure 52). 2.
Page 9 10. Rigging the Vang: Rigging the Vang: Laser Standard Models Laser Race Models 1. Locate the vang line from the delivery kit 1. Check the items in the pack and lay them line bag. Retrieve the two vang blocks and on the deck (ﬁ...
Page 10 11. Rigging the Cunningham: Rigging the Cunningham: Laser Standard Models Laser Race Models 1. Locate the cunningham line from 1. Check the items in the pack and lay the delivery kit. them on the deck (ﬁ gure 91). 2. Tie a bowline around the vang tang 2.
Page 11 12. Mast Retaining Line 13. Daggerboard Retainer Standard and Race Models Standard Model 1. Tie the two white bobbles to the red 1. Retrieve the daggerboard retainer shock 4 mm line, one to each end (thread the cord from the delivery kit line bag. On the bobble on and tie an overhand knot to ends of the shock cord there will secure it).
Page 12 Option: LaserPerformance has teamed up with top parts suppliers to off er the following new and exciting aftermarket items for your Laser, Laser Radial or Laser 4.7: FRP blades, Laser Blocks and Friction Pad. You can get these items from Figure 83 | Tip: Remove the battens before ﬂ...
Page 13 Trolley bunks padded with carpet or foam can cause blistering in the gelcoat and changes to the hull color. Please do not transport your LaserPerformance product on a trailer or trolley that has x 38mm (ﬁ gure 88).
Page 14 # license plate number state / county register in LaserPerformance equips our Laser, Laser Radial and Laser 4.7 with the highest quality parts available registration number state / county register in from top suppliers. We partner with key suppliers such as English Braids, North Sails, Holt and Harken to develop top of the line dinghy equipment so your boat will perform at the highest level with the factory supplied rope, sails, and hardware.
Page 15 Laser, SB3, Sunﬁ sh, and Dart PO Box 38442 are trademarks used under license. Dubai, UAE LaserPerformance reserves the right to make t +971 (4) 885 7601 design and/or speciﬁ cation changes to any of their products as part of their continuous development program.

This manual is also suitable for:

Laser radial Laser 4.7