Brake/Tail Light; Replacing A Turn Signal Light Bulb - Yamaha MT07 TRACER Owner's Manual

Periodic maintenance and adjustment

Brake/tail light

This model is equipped with an LED-
type brake/tail light.
If the brake/tail light does not come on,
have a Yamaha dealer check it.
6
EAU70540
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
6-36
EAU24205
1
1
[ECA11192]