Connecting A Computer; To Connect A Computer - Toshiba 42WP56A Owner's Manual

Equipment connections

Connecting a computer

• Before connecting PC and audio cables, remove the back terminal covers (see page 10).
• An analog RGB (15 pin) computer cable can be connected.

To connect a computer

Computer
Connect a PC cable from the computer to the RGB/PC terminal on the back of the TV.
The following signals can be displayed:
• VGA: 640 x 480 @ 60 Hz
• SVGA: 800 x 600 @ 60 Hz
• XGA: 1024 x 768 @ 60 Hz
If you connect this unit to your PC, the compressed images are displayed in SVGA and XGA modes; therefore
the picture quality may deteriorate and characters may not be read.
Notes:
• Some PC models cannot be connected to this TV.
• There is no need to use an adapter for computers with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured
depending on some signals. This is not a malfunction.
• If the edges of the picture are stretched, readjust the picture size/position adjustments in the PC Setting menu.
• Depending on the specification of the PC you are playing the DVD-Video on, and the DVD's title, some scenes may
be skipped, or you may not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15 pin connector
Pin assignment
for RGB/PC
terminal
38
Pin No.
1
1
6
11
2
3
4
5
6
15
10
5
7
8
TV back view
Mini D-sub
15 pin
Audio cable for
PC-to-TV connection
RGB PC cable
Conversion adapter
(if necessary)
Signal name Pin No.
R
G 10
B 11
NC (not connected) 12
NC 13
Ground 14
Ground 15
Ground
Signal name
9 NC
Ground
NC
NC
H-sync
V-sync
NC