Long Life Setting - Toshiba 42WP56A Owner's Manual

Using TV's features

Long life setting

• The Long life setting allows you to prevent or mitigate the permanent after-image on the screen. See page 7 for the detail
of the permanent after-image.
• There are 4 modes in the Long life setting; Picture shift, Side panel, Inverse, White pattern.
• The picture shift mode and Side panel are effective against preventing the permanent after-image, and the Inverse mode
and the White pattern mode are useful for mitigating the deterioration of the previously-generated permanent after-image.
Long life setting
CALL
1 2 3
4 5 6
7 8 9
0
MENU EXIT
P
DVD
MENU
OK
P
TV
VCR
DVD
Note:
When you select Picture shift with
selecting PC input source, belt may
appear in the upper, lower, right or left
side of the screen, or parts of the picture
may be obscured depending on some
signals. This is not the malfunction.
To use the long life function:
Press the MENU button, then
press the or button to
display the FUNCTION menu.
Press the or button select
Long life, then press the OK
button to display the Long life
menu.
Press the or button to
select the mode you prefer.
Picture shift
Picture moves intermittently.
Press the or button to set to On. To deactivate, set to Off.
It is recommended to set to On because the Picture shift mode is
useful for preventing the permanent after-image. On is set by
default.
Side panel
Adjust the Side panel setting to prevent permanent after-image of
the boundary lines between the side panels and picture in 14:9 or
4:3 mode.
Press the or button to adjust.
The more you turn the brightness high, the more effective is
obtained.
Inverse
Picture will be inversed.
Press the OK button. Confirm the
dialogue box and press the OK button.
To recover from Inverse, press any button.
The picture is displayed alternately
between positive image and negative image to reduce the
permanent after-image of the screen.
White pattern
Produces an entirely white screen.
Press the OK button. Confirm the
dialogue box and press the OK button.
To recover from White pattern, press any button.
After the result of the permanent after-image, the image retention
may be mitigated if you keep on the White pattern for about half a
day.
FUNCTION
Teletext FAST
Teletext SW 1
Auto format On
Gray screen On
Long Life OK
MENU EXIT
Back Watch TV
Long Life
Picture shift On
Side panel 2
Inverse OK
White pattern OK
MENU EXIT
Back Watch TV
Inverse
Press OK to inverse picture.
Press any key to cancel.
EXIT OK
Watch TV Start
White pattern
Press OK to show white pattern.
Press any key to cancel.
EXIT Watch TV OK Start
31