Restore Factory Settings - TRU-BOLT 1742006 Manual

Bluetooth square electronic deadbolt
Table of Contents

Advertisement

PROGRAMMING PHYSICAL KEYPAD
1. Turn On/Off Auto Lock Function
AP
a. Input the
b.
- Green light and beep
c. 5
d.
e. Input time (20 - 900 seconds, and 00 to turn off)
f.
- Green light and beep
2. Sound Off
AP
a. Input the
b.
- Green light and beep
c. 6
d.
e. 1
f.
- Green light and no beep
3. Sound On
AP
a. Input the
b.
- Green light and no beep
c. 6
d.
e. 2
f.
- Green light and beep

4. Restore Factory Settings

a. Press and hold the reset button on the PCB board for three seconds (Remove cover, The reset button is
located inside the back panel, See image below)
b. The old Administrator of the lock deletes the lock from the App (Must be done near lock)
VERY IMPORTANT
If you have connected the lock to
the My Key Application, the default
Passcode "1234" will no longer
work; and you will have to use the
from the App, which should be
AP
changed after connecting (see Lock
Settings step 3)
The time between inputs can be no
longer than 5 seconds. After which
the programming process will be
terminated.
The batteries need to be installed in
order for the Reset Button to work.
It is preferred that the
lock from their device instead of
resetting manually.
A
If the
resets the lock manually,
and does not delete the lock from
their device first, the lock may
not be able to work with that
account again.
Reset Button
Page 18
The Physical Keypad is used
to lock and unlock the door,
and program functions
A
delete the
OR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1742006 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

1742002

Table of Contents

Save PDF