Page 1
You will find the model number and serial number on the back of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your TOSHIBA dealer regarding this product. Model number: Serial number:...
Welcome to Toshiba • Thank you for purchasing this Toshiba LCD Color Television. This manual will help you use the exciting features of your new TV. • Instructions in this manual are based on using the remote control. • You also can use the controls on the TV if they have the same name as those referred to on the remote control.
7) Never place the TV next to a stove where it will be exposed to oil, smoke, or steam, or in a location where there is a large quantity of dust. This may cause a fire or an electric shock. 8) Install the TV in a horizontal, stable location.
4) Never stand or climb on the TV. Be especially careful in households with children to prevent them through climbing on top of the TV. It may move, fall over, break, become damaged or cause an injury. 5) When the TV will not be used for a long period of time, such as during vacation or travel, remove the power plug from the wall outlet for safety.
This is not a sign of malfunction. Exemptions • Toshiba is not liable for any damage caused by fires, natural disaster (such as thunder, earthquake, etc.), acts by third parties, accidents, owner’s misuse, or uses in other improper conditions.
The exact type and positioning of the antenna will depend upon your particular area. Your Toshiba dealer or service personnel can best advise you on which antenna to use in your area. Before connecting the antenna cable, turn off all main power switches.
TV top, front and side panel controls • You can operate your TV using the buttons on the side panel or the remote control. The back and side of the panel provide the terminal connections to connect other equipment to your TV (- “Connecting your TV” pages 22, 23, 24). •...
TV back panel connections 11 O MONITOR (output terminals) — Standard video and standard audio outputs (- page 22). 12 o (3) (Video 3 input terminals) — High-definition component video and standard audio inputs (- page 22). 13 o PC/HDMI (AUDIO) (input terminals) — For use when connecting a personal computer (PC) or a DVI device with standard audio output (- page 23, 24).
Learning about the remote control Location of controls Teletext on/off (- pages 20, 21) • CALL (- pages 12, 13) • Initial/index function for Teletext (- page 21) To return to the previous program (- page 12) Picture mode selection (- page 15) MENU (- page 11) •...
Displaying the menu chart PICTURE menu PICTURE Picture settings Picture settings 3D Color management 3D Color management Base color adjustment Base color adjustment Cinema mode Cinema mode MENU Back EXIT Watch TV MENU Back SOUND menu Stable sound SOUND Auto Dual Dual 1 Bass...
Watching TV programs Selecting the menu language Choose from 9 different languages (English, Chinese (CS), Malay, Thai, Vietnamese, Russian, Arabic, Persian or French) for the on-screen display. Press M, then press I or i to display SET UP menu. SET UP Language English Auto tuning...
Manually setting channels in the channel memory From the SET UP menu, press u or U to select Manual tuning. Press Q to display the Manual tuning menu. Press u or U to select the program position you want to arrange.
Picture adjustment Selecting the picture size Press and hold O until the picture size list appears on the screen, then press u or U to select the appropriate picture size (or press O repeatedly to select required picture size directly). Ex.
• If the aspect ratio of the selected format is different from the one of the TV transmission or video program, it can cause a difference in vision. Change to the correct aspect ratio picture size. • When using the PC mode, the moving image quality may be deteriorated.
Activating the black stretch This function increases the strength of dark areas of the picture which improves definition. Press M, then press I or i to display the PICTURE menu. PICTURE Picture settings 3D Color management Base color adjustment Cinema mode MENU Back EXIT...
From the PICTURE menu, press u or U to select Cinema mode. Press I or i to select On or Off. Note: When a DVD movie with subtitle is playing back, this mode may not work correctly. Sound adjustment Setting the MTS (Multi-channel TV Sound) Auto mode The MTS Auto mode automatically recognize stereo/bilingual programs depending on the broadcast signal.
Using the SRS WOW surround sound SRS WOW is a special combination of SRS Labs audio technologies that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer and wider. WOW consists of three features;...
Press M, then press I or i to display the FUNCTION menu. FUNCTION Teletext Auto Auto for mat Blue Screen Side panel MENU EXIT Back Watch TV Press u or U to select Auto format, then press I or i to select On or Off.
If FASTEXT is not available, you can access any page simply by entering a 3-digit page number or pressing the corresponding colored button. For further information on your particular text system(s), see the broadcast teletext index page or consult your local Toshiba dealer. 14:57:55 Baseball...
Using LIST mode Press E to access teletext. TEXT M00 14:58:55 Green Yellow The four choices at the bottom of the screen are now number – 100, 200, 300 and 400, which have been programmed into the TV’s memory. To view these pages, use the colored prompt buttons. e.g.
Side connections You can connect a wide variety of auxiliary equipment via the terminals located on the right side of the panel o (2). Please always refer to the owner’s manual of the equipment to be connected for full details. Connection example TV right side view Camcorder...
• This TV is able to connect with HDMI devices. But it is possible that some HDMI devices may not operate properly with this TV. Connecting an HDMI or a DVI device The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device.
Setting the HDMI audio mode You can select sound of an HDMI or DVI device connected to the HDMI input terminals (- page 23) from three modes: Auto, Digital or Analog. Note: This function is available only when the PC/HDMI audio mode HDMI is set to Press M, then press I or i to display the SET UP menu.
Signal names for mini D-sub 15 pin connector Pin assignment for RGB/PC terminal Pin No. Signal name Pin No. NC (not connected) Ground Ground Ground Using the PC setting • In the PC input mode, you cannot select the Color, Tint, Sharpness, Black stretch, MPEG NR and DNR in the Picture setting menu and Cinema mode (- page 16).
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions. Symptom and solution TV will not turn on • Make sure the power cord is plugged in, then press ! or •...
Power consumption 26A3000A/E/T: 110 W, 0.9 W (standby) 32A3000A/E/T: 130 W, 0.9 W (standby) Dimensions 26A3000A/E/T: 666 mm (W) 514 mm (H) 239 mm (D) 32A3000A/E/T: 800 mm (W) 592 mm (H) 285 mm (D) Mass (Weight) 26A3000A/E/T : 12.5 kg 32A3000A/E/T : 16.5 kg...