Scope; General Description; Applicable Protocol; Ip Address Setting - Toshiba TEC B-SX4T Network Specification

1. SCOPE

This specification applies to the network for the B-SX4T and the B-SX5T general purpose thermal
label/tag printers.

2. GENERAL DESCRIPTION

With the optional PCMCIA board (B-9700-PCM-QM) and either the LAN card or the optional LAN
interface board (B-9700-LAN-QM), the B-SX4T and the B-SX5T can be connected to the host by using
TCP/IP.
NOTE: If the ATA card has been inserted in Slot 1 on the PCMCIA board, be sure to press the
[PAUSE] key before turning the printer OFF. (For more details, see chapter 12 "NOTES ON
USING NETWORK FUNCTION".)

3. APPLICABLE PROTOCOL

TCP/IP

4. IP ADDRESS SETTING

Each IP address should be set by using a command or in the system mode.
Printer IP address
Gateway IP address
Subnet mask
Socket communication port

5. NETWORK SPECIFICATIONS

This printer has the functions of the LPR server, Web printer, socket communication, FTP server, mail
transmission/reception, and DHCP client, as the network specifications.
Initial value at shipment
192. 168. 10. 20
0. 0. 0. 0
255. 255. 255. 0
OFF 8000
- 1 -
Remark