Advertisement
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com or call Customer Service
New Zealand
0800 804 222
436700
Australia
1300 638 483
0800 195 1602
WAIPORI BASIN MIXER
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min 35kPa, Max 1000kPa.
Recommended 35kPa - 500kPa.
Recommended installation of a pressure
limiting valve if supply exceeds 500kPa.
Operating Temperature:
Hot: Max 80°C.
Cold: Min 5°C.
NB: New Zealand Building Code Clause G12 -
Water Supplies specifies all outlets used
primarily for personal hygiene shall deliver
water at a safe temperature.
Inlet Connections:
All ½" BSP.
UK
Issue C
Advertisement
Table of Contents
Related Manuals for METHVEN WAIPORI BASIN MIXER
Summary of Contents for METHVEN WAIPORI BASIN MIXER
- Page 1 Inlet Connections: All ½" BSP. Methven warrants this product against manufacturing defects and that it is suitable for use under the operating conditions specified in this instruction sheet. For your warranty please refer to www.methven.com or call Customer Service...
- Page 2 TIP - Install product to mounting surface before connecting second hose to mixer. IMPORTANT Please read all of the instructions before installation This mixer is designed for equal and unequal pressure systems. All pipework must be thoroughly flushed prior to the installation of the mixer. In-line filters must be fitted on both hot and cold supplies to prevent foreign particles damaging the ceramic cartridge.
Need help?
Do you have a question about the WAIPORI BASIN MIXER and is the answer not in the manual?
Questions and answers