Download Print this page
METHVEN FUTURA Installation Manual

METHVEN FUTURA Installation Manual

Shower mixer with divertor

Advertisement

Quick Links

Remove half-dome (if attached)
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com or call Customer Service
New Zealand
0800 804 222
433347
Ceramic cartridge adjustment
Do not remove the ceramic cartridge from the
body assembly while carrying out the following
adjustments. Note, the cartridge is factory set
for maximum temperature.
Flow limiting adjustment
-
+
Mix temperature limiting adjustment
-
Australia
UK
1300 638 483
0800 195 1602
FUTURA SHOWER MIXER WITH DIVERTOR
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min: 150kPa, Max 1000kPa
Recommended 150 – 500kPa
Recommended installation of a pressure limiting valve if supply pressure exceeds 500kPa
Operating Temperature:
Recommended 55°C at the mixer
Hot: Max 80°C
Cold: Min 5°C
NB: New Zealand Building Code Clause G12 - Water Supplies specifies all outlets used primarily for personal
hygiene shall deliver water at a safe temperature.
Inlet Connections: All ½" BSP
Issue c

Advertisement

loading
Need help?

Need help?

Do you have a question about the FUTURA and is the answer not in the manual?

Questions and answers

Summary of Contents for METHVEN FUTURA

  • Page 1 Remove half-dome (if attached) Mix temperature limiting adjustment Methven warrants this product against manufacturing defects and that it is suitable for use under the operating conditions specified in this instruction sheet. For your warranty please refer to www.methven.com or call Customer Service...
  • Page 2 IMPORTANT Please read all of the instructions before installation Avoid restrictive piping, fitting or sharp angled bends when plumbing the mixer. The maximum working pressure of the ceramic cartridge is 1000kPa. Do not hydrostatic test the installation with this mixer installed. Damage to the ceramic cartridge may occur. All pipework must be thoroughly flushed prior to installation of the mixer.