Table of Contents
Advertisement
KEEPING THINGS CLEAN (CONT.)
Resetting the Check Filter
Indicator
Reset the Check Filter Indicator when:
A.
lights up.
1.
Replace the air filter.
2.
Turn on the air purifier.
3.
Press and hold
4.
will turn off when successfully
reset.
B.
The air filter was changed before
lit up.
1.
Press and hold
This will turn on
2.
Press and hold
seconds.
3.
will turn off when successfully
reset.
Replacing the Air Filter
1.
Unplug the air purifier. Flip the air purifier
over and remove the filter cover (see
Getting
Started, page 6).
2.
Remove the old air filter.
3.
Clean out any remaining dust or hair
inside the purifier using a vacuum hose.
Do not
use water or liquids to clean the
purifier.
[Figure 3.2]
4.
Unwrap the new air filter and place it into
the housing (see
page 6
).
5.
Replace the cover and cap. Plug in the
air purifier.
6.
Reset the Check Filter Indicator (see
page 10).
for 3 seconds.
for 3 seconds.
.
again for 3
Getting Started
,
Storage
If not using the air purifier for an extended
period of time, wrap both the purifier and the
filter in plastic packaging and store in a dry
place to avoid moisture damage.
Figure 3.2
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Core 300 and is the answer not in the manual?
Questions and answers
Greetings: We purchased 2 PlasmaPro 400 s units (from Best Buy, delivered Jan15, 2025; would have bought direct from you but needed ASAP after wildfires nearbuy). We have the receipt. They are working great so far but do we have to do anything to validate our warranty? Thank you.
I changed the filter but I still see a button that indicates change filter
@JOYCE BROWN
The change filter indicator remains on after replacing the filter in the Levoit Core 300 because the timer needs to be reset. To reset it, hold down the red/white filter light icon for approximately 5-7 seconds until the light turns off.
This answer is automatically generated
@Mr. Anderson Thank You for that information, it worked perfectly.