Hytera PD98X User Manual page 17

» Enable the DTMF keypad, enter the connect
code, and then press the PTT key.
» With the One- Key Connect feature enabled
by your dealer, press .
The radio accesses the phone system upon
displaying the dialing information.
2. Enter the phone ID through the numeric keypad.
3. Press and hold the PTT key.
l To initiate a phone call through the contact list, do as
follows:
1. Enable the DTMF keypad, and then enter the
connect code.
The radio accesses the phone system upon
displaying the dialing information.
2. Go to Menu > Phone > Phone Contact , and
then select the contact from the list.
3. Press and hold the PTT key.
Trunking Mode
l To initiate a phone call through the contact list, do as
follows:
1. Press the preprogrammed Favorite Contact
List or Private Contact key, or go to Menu >
Contact > Private Contact or Favorite
Contact.
2. Select the PSTN/PABX contact.
3. Press or the PTT key.
l To initiate a phone call through the keypad, do as
follows:
1. Go to Menu > Settings > Radio Set > Keypad
Mode, and then select Enable.
2. On the home screen, enter the PSTN/PABX
number.
3. Press , , or the PTT key.
Keypad mode is enabled by your dealer. To
input a number complying with the dialling
rules, consult your dealer for more details.
If the Phone Dial feature is enabled by your dealer, you
can do as follows:
1. Go to Menu > Contact > Phone Dial.
2. Press to switch the input mode.
3. Enter the customized PSTN/PABX number
between 1-20digits.
4. Press , , or the PTT key.
l To initiate a phone call through the call log, do as
follows:
1. Enter the call log in one of the following ways:
» Go to Menu > Call Logs > Outgoing ,
Incoming, or Missed> Outgoing List, Incoming
List, or Missed List.
» If is programmed as the Redial Call Log
key by your dealer, press
screen.
» If is programmed as the BackDial Call
Log key by your dealer, press
screen.
2. Select the phone call record.
3. Press or the PTT key.
13
l
To enable the DTMF keypad, press the
preprogrammed DTMF Keypad key or go to
Menu > Phone > DTMF Keypad.
l The connect code is the code used by the radio
to access the phone system and the disconnect
code is the code used by the radio to exit the
phone system. The connect code and the
disconnect code are configured by your dealer.
Receiving a Phone Call
Conventional Mode
When receiving a phone call, you can enter the connect
code through the numeric keypad to joins the phone
system. Then you can listen to the phone call.
Trunking Mode
When receiving a phone call, the radio displays
You can establish the call by pressing
key within the preset time.
After the call is successfully established, the radio
displays
Ending a Phone Call
on the home
Conventional Mode
In conventional mode, a phone call ends in one of the
following cases:
on the home
l The radio user enters the disconnect code through the
numeric keypad.
l The One-Key Disconnect feature is enabled and the
radio user presses
l The phone user hangs up during the call.
or the PTT
.
.
.