Setting Address Of The Erv And Installation Option; Procedure Of Option Setting - Samsung AN026JSKLKN Series Installation Manual

Setting address of the ERV and installation option

Procedure of option setting

f Setting can be done by using a Samsung air conditioner wireless remote controller for indoor units . (Should be purchased f
separately . )
Step 1. Entering setting mode
1 . Remove batteries from the remote controller .
2 . While pressing and holding the [Temp +] and [Temp -] buttons, insert the batteries .
3 . Check whether you enter the option setting stage .
Step 2. Procedure of option setting
after entering the option setting stage, select the option as shown below .
• 24 digits are available to be input for the option setting .
• SEG1, SEG7, SEG13, and SEG19 are page option so they do not need to be set .
CAUtIoN
• Set the each 2 bit option code in order except page options . SEG2, SEG3  SEG4, SEG5  SEG6, SEG8  SEG9,
SEG10  SEG11, SEG12  SEG14, SEG15  SEG16, SEG17  SEG18, SEG20  SEG21, SEG22  SEG23, SEG24
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
0 X X
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
2 X X
Entering mode for
option setting
[Temp . + ] button
[Temp . - ] button
Entering mode for
option setting
[Temp . + ] button
[Temp . - ] button
X X X 1
X X X 3
ENGLISH-32
option setting mode
[Mode] button
[Fan ∧] button
[Fan ∨] button
❇ ❇ Samsung air conditioner remote controller
(should be purchased separately)
option setting mode
[Mode] button
[Fan ∧] button
[Fan ∨] button
❇ ❇ Samsung air conditioner remote controller
(should be purchased separately)
X X X X
X X X X
On(SEG1~12) Off(SEG13~24)
X
X