Advertisement
Quick Links
Download this manual
See also:
User Manual
Measuring everything that matters:
www.usa.siemens.com/pi
Siemens Process Instrumentation offers
best-in-class measurement and seamless
integration into your automation system.
We are the total solution provider for flow,
level, pressure, temperature, weighing,
positioners and more.
Follow us on:
www.twitter.com/siemensii
www.facebook.com/siemensii
www.youtube.com/siemens
https://usa.siemens.com/pablog
Siemens Industry, Inc.
Process Industries and Drives
100 Technology Drive
Alpharetta, GA 30005
1-800-365-8766
info.us@siemens.com
Subject to change without prior notice
Order No.: A5E46016022
All rights reserved
Printed in USA
© 2018 Siemens Industry, Inc.
Subject to changes and errors. The information given in this document
only contains general descriptions and/or performance features which
may not always specifically reflect those described, or which may
undergo modification in the course of further development of the prod-
ucts. The requested performance features are binding only when they
are expressly agreed upon in the concluded contract.
All product designations may be registered trademarks of Siemens AG.
All other designations in this document may represent trademarks
whose use by third parties for their own purposes may violate the pro-
prietary rights of the owner.
Advertisement
Related Manuals for Siemens SITRANS FEC920
Summary of Contents for Siemens SITRANS FEC920
- Page 1 The requested performance features are binding only when they are expressly agreed upon in the concluded contract. All product designations may be registered trademarks of Siemens AG. All other designations in this document may represent trademarks whose use by third parties for their own purposes may violate the pro-...
- Page 2 Quick Start Guide SITRANS FEC920 Thermal Energy Calculator usa.siemens.com/fec920...
-
Page 3: Table Of Contents
Table of contents Legal Information Introduction Mounting Commissioning Appendix SITRANS FEC920 Dimensional Drawing SITRANS FEC920 Cable Entrance Dimensional Drawing... -
Page 4: Legal Information
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenace are required to ensure that the products operate safely and without any problems. -
Page 5: Introduction
Introduction This Quick Start is for Siemens SITRANS FEC920 Thermal Energy Calculator. The FEC920 is a pre-configured device per the customer specifications. Many user modifiable items exist and instructions can be found in this guide and the user manual. This device, once commissioned, is designed to start up and measure flow and temperature and display the energy variable configured. -
Page 6: Mounting
• If alternate mounting surface is used it MUST support four times the weight of the unit. • Dimensions of unit and location of four (4) mounting holes are shown in Figure 1. Figure 1 - SITRANS FEC920 Physical Dimensions The FEC920 can be mounted on any wall surface including wood, metal or concrete. -
Page 7: Commissioning
+24V to the “F1” labeled terminal of Fuse block ii. Neutral to the “N” labeled terminal of Fuse block iii. Shield to the Ground lug on the base plate – Labeled Figure 2 - SITRANS FEC920 Cable Entrance Dimensions... - Page 8 4. Wire the Flow Meter and Temperature Inputs per the wiring diagram found on the inside door of the FEC920, or see Figure 3 below: Figure 3 - SITRANS FEC920 Signal Wiring Diagram 5. Temperature transmitter signals are expected to be 4 – 20 mA with the loop power provided by the FEC920 a.
-
Page 9: Appendix
Appendix Enclosure Side View Enclosure Front View Enclosure Side View Section B-B Figure 4 - SITRANS FEC920 Dimensional Drawing... -
Page 10: Sitrans Fec920 Cable Entrance Dimensional Drawing
Cable Entrance Locations Enclosure Bottom View Figure 5 - SITRANS FEC920 Cable Entrance Dimensional Drawing Notes: • Location 12 has a preinstalled RJ45 connector for network connection • Location 15 is recommended for Power Wiring • Locations 16 (4 in shaded) are recommended for Flow and Temperature input signals...