Safety 1st Go Hybrid Booster Manual
  1. Manuals
  2. Brands
  3. Safety 1st Manuals
  4. Car Seat
  5. Go Hybrid Booster
  6. Manual
Safety 1st Go Hybrid Booster Manual

Safety 1st Go Hybrid Booster Manual

22-100 pounds 10-45.4 kg 34-57 inches 85.1-144.8 cm
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
4358-4856 Go Booster
8/31/09
12:02 PM
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Go Hybrid Booster and is the answer not in the manual?

Questions and answers

Related Manuals for Safety 1st Go Hybrid Booster

Summary of Contents for Safety 1st Go Hybrid Booster

  • Page 1 4358-4856 Go Booster 8/31/09 12:02 PM Page 1...
  • Page 2 4358-4856 Go Booster 8/31/09 12:02 PM Page 3 E. Installing Forward-Facing..Pages 31-47 A. Before You Begin ....Pages 3-8 F-1 Install Forward-Facing With Harness System A-1 Thank You...

  • Page 3: Registration And Safety Notices

    4358-4856 Go Booster 8/31/09 12:02 PM Page 5 A-2 Registration and Safety Notices A-1 Thank You... Thank you for choosing this car seat, referred to throughout this Please complete the postage-paid registration card that came with manual as a child restraint. The DJG family is committed to your child restraint, and send it to us.
  • Page 4 4358-4856 Go Booster 8/31/09 12:02 PM Page 7 A-3 Understanding Your Child Restraint Harness System Detail Front View Top Anchorage Harness System (Tether) Strap (remove for belt-positioning Harness Height Adjuster Harness Adjuster booster use) Adjustable Headrest Chest Clip Buckle Pad (remove for belt-positioning Armrest booster use)
  • Page 5 4358-4856 Go Booster 8/31/09 12:02 PM Page 9 Back View Side View Bottom View Top Anchorage Instructions (Tether) Strap Adjuster (in bottom of base) LATCH Belt Adjuster Free End of Harness Top Anchorage Instructions Storage (Tether) Strap Strap LATCH Storage (on select models, an Top Anchorage (under seat base)

  • Page 6: Vehicle Seating Position

    4358-4856 Go Booster 8/31/09 12:02 PM Page 11 Do not use a child restraint that has been in a crash. You must get a new child restraint. Failure to follow these warnings can result in the serious injury or death of your child. To help you recognize instructions which are most critical to B-3 Child Restraint Use your child’s safety, we use this symbol:...

  • Page 7: Removing Harness System

    4358-4856 Go Booster 8/31/09 12:02 PM Page 13 C-1 Removing Harness System From the top of the Seat Base, pull both Vehicle Harness system MUST be removed to use this child Belt Loops through Plastic restraint as a Belt-Positioning Booster. Base and Pad Locate the 4 Metal Harness Retainers and the Metal...

  • Page 8: Installing Harness System

    4358-4856 Go Booster 8/31/09 12:02 PM Page 15 C-2 Installing Harness System Install both Rear Metal Harness Retainers Position Harness System From the top of the seat base, Orient harness system into fold up the seat pad to expose position. Make sure buckle is the two rear harness slots.

  • Page 9: Removing Seat Pad For Cleaning

    4358-4856 Go Booster 8/31/09 12:02 PM Page 17 C-3 Removing Seat Pad for Cleaning Install both Forward Metal Harness Retainers You do not have to remove the harness to remove the pad, but you will need to remove the crotch buckle. Pull up on adjuster to make sure it is secured.

  • Page 10: Installing The Seat Pad

    4358-4856 Go Booster 8/31/09 12:02 PM Page 19 C-4 Installing the Seat Pad Undo the Elastic Straps Detach the four elastic straps on the bottom of the seat base. Do not use child restraint without the seat pad. Replace Seat Base Pad Starting at the front of the seat base, replace the seat base pad.
  • Page 11 4358-4856 Go Booster 8/31/09 12:02 PM Page 21 Completed child restraint. Attaching the Backrest Pad Starting at the bottom, wrap the smaller pad tab (A) around the horizontal strap connecting the harness straps. Insert the larger pad tab into the slot in the tether/harness support bracket (B).

  • Page 12: Understanding Your Vehicle

    4358-4856 Go Booster 8/31/09 12:02 PM Page 23 D-1 Understanding Your Vehicle Your vehicle’s features may be considerably different than those pictured here. Consult your vehicle owner’s manual to help identify your vehicle’s specific features and locations. Use the child restraint only on vehicle seats that face forward.

  • Page 13: Choosing Latch Or Vehicle Belts

    4358-4856 Go Booster 8/31/09 12:02 PM Page 25 D-4 Knowing Your Vehicle Belts D-3 Choosing LATCH or Vehicle Belts Review your vehicle’s owner manual for vehicle seat belt use with When installed properly, the LATCH or Vehicle Belts will secure the child restraint equally.

  • Page 14: Using A Locking Clip

    4358-4856 Go Booster 8/31/09 12:02 PM Page 27 If the latch plate slides up and down on the vehicle belt, and you several inches, then pull on it again. If it moves freely, it is an ELR have an ELR retractor, you MUST use a locking clip to install the vehicle belt.
  • Page 15 4358-4856 Go Booster 8/31/09 12:02 PM Page 29 Route the Lap Belt Only in Tighten Vehicle Belt front of the Armrest as shown Push down firmly on the child restraint and while pulling on the shoulder belt to tighten. Feed the shoulder belt back into the retractor.

  • Page 16: Aircraft Information

    4358-4856 Go Booster 8/31/09 12:02 PM Page 31 D-7 Choose Position for Your Child Rebuckle Vehicle Belt Your child’s height, weight and age determine how your child restraint should be used and placed in the vehicle. 22-65 lbs (10.1-29 kg) Check Belt tightness and 34-52 in.

  • Page 17: With Latch

    4358-4856 Go Booster 8/31/09 12:02 PM Page 33 E-1 Install Forward-Facing With Harness System E-2 Install Forward-Facing With LATCH 22-65 lbs (10.1-29 kg) and 34-52 in. (85.1-132.2 cm) and Over 1 Year Old. Forward-Facing using 5-point harness Note: Review your vehicle’s owner manual for LATCH belt use. Do not use the LATCH system along with the vehicle belt.
  • Page 18 4358-4856 Go Booster 8/31/09 12:02 PM Page 35 Attach Top Anchorage Connect LATCH to Vehicle Hook (Tether) LATCH Anchor Make sure the backrest and NOTE: The LATCH connector’s red release button MUST face away headrest is fully extended before tightening the tether. from child restraint and the arrows on connectors MUST face Consult the vehicle’s owner...
  • Page 19 4358-4856 Go Booster 8/31/09 12:02 PM Page 37 E-3 Securing Child in Child Restraint Check Belt tightness Grasp the child restraint at the Raise Harness Height belt path with one hand. Push Adjuster and pull the child restraint from Squeeze the harness height side to side, forward and back.
  • Page 20 4358-4856 Go Booster 8/31/09 12:02 PM Page 39 Unbuckle Harness To Change Buckle position Press red button in. Pull buckle With the bottom of the child tongues out. Place harness restraint facing up, locate the straps out of the seat. buckle’s metal retainer.
  • Page 21 4358-4856 Go Booster 8/31/09 12:02 PM Page 41 Buckle Harness Pull buckle’s metal retainer completely through pad and Push each buckle tongue into plastic base. Lock the metal buckle until you hear a “click”. retainer in place. Remember to always pull up on harness straps to make sure buckle is locked.

  • Page 22: Removing Child From Child Restraint

    4358-4856 Go Booster 8/31/09 12:02 PM Page 43 E-4 Removing Child from Child Restraint Tighten Harness Pull on free end of harness, strap Release Chest Clip located on the outside of child’s leg, until harness is snug. Press on release button and Repeat for other harness strap.
  • Page 23 4358-4856 Go Booster 8/31/09 12:02 PM Page 45 Route the Lap Belt ONLY in E-5 Install Forward-Facing with front of the Armrest as Vehicle Belts shown. Note: Review the section D-4 to determine what kind of vehicle belts you have. Review your vehicle’s owner manual for vehicle seat belt use.
  • Page 24 4358-4856 Go Booster 8/31/09 12:02 PM Page 47 Tighten Top Anchorage Tighten Vehicle Belt Strap (Tether) Push down firmly on the child Pull on free end of the top restraint and pull on the vehicle anchorage strap to tighten as shoulder belt or loose end of the shown.
  • Page 25 4358-4856 Go Booster 8/31/09 12:02 PM Page 49 F-1 Preparing Belt-Positioning Booster F-2 Installing Using the Lap and Shoulder Belts 40-100 lbs (18.1-45.4 kg) and 43-57 in. (110.1-144.8 cm) and Over 1 Year Old. Belt-positioning booster using only vehicle Store the LATCH Belts in the storage location. lap/shoulder belt.

  • Page 26: Warranty

    4358-4856 Go Booster 8/31/09 12:02 PM Page 51 Warranty Dorel Juvenile Group, Inc. (DJG) warrants this product to the original retail Use only the vehicle’s lap and shoulder belt system purchaser as follows: when restraining the child in this belt-positioning This product is warranted against defective materials or workmanship for one booster seat.

  • Page 27: Replacement Parts Order Form

    4358-4856 Go Booster 8/31/09 12:02 PM Page 53 Replacement Parts Order Form Complete the form below. Your model number with color code and manufacturer date code MUST be included on the form to ensure proper replacement parts. Your model number with color code and the date code can be found on a sticker on the side of child restraint.
  • Page 28 4358-4856 Go Booster 8/31/09 12:02 PM Page 55 MUST have this information to process your order: Model Number (5 digits & 3 letters):____________________ Manufacture Date (mm/dd/yyyy): ______________________ Replacement Parts List NOTE: If requested color is not available, similar color will be substituted. Part Cost Quantity Total Cost...

Table of Contents