GE eBike II Series Service Manual page 63

• For safety reasons, a tilt protection has to be mounted
(marked 5 / 5).
Warning
If the ergometer is lifted up, the tilt protection has always to be
mounted and secured!
• The static calibration with 8kg weight can be
performed.
u
nlIftIng tHe ergoMeter
• Dismount the tilt protection (5 / 5).
• Carefully lift the lever arm of the main support frame
whilst holding the ergometer at the handle bar, until
the ergometer chassis stands stable on the floor and
the front support.
• Disassemble the lift tool in reverse order.
2018112-069 Rev. F
e
rgoMeter in lift
eBike II, eBike II L, eBike II EL
-
up poSition with tilt protection Mounted
- 63 -