Controlled Energy Cons; Service; Clean Drain Pump (Lp); Service Interval - Miele PWM 908 Operating And Installation Instructions

Supervisor level
If the automatic load control is deacti-
vated, the machine will always carry out
the program sequence based on a full
load.
Factory default: On

Controlled energy cons.

With this option selected, the machine
will optimize the energy it uses in the
Whites, Cottons, and Minimum iron
programs.
Factory default: On

Service

Clean drain pump (LP)

The user sees a message when the
drain pump filter has to be cleaned.
The message is displayed every 500
operating hours.
The message appears at the end of the
program.
Factory default: Off
88

Service interval

Service information can appear in the
display. You can configure whether a
date or the number of operating hours
is displayed.
You can select up to 3 messages with
their own text.
Your message is displayed at the end of
the program and can be acknowledged
with OK. The same message appears at
the end of the next program.
Settings
This setting allows you to determine the
interval (by hours or date) at which the
message appears.
– Factory default: Off
– By time
You can then select a time interval
from 1–9999 hours.
– By date
You can then enter a date.
Message text
Enter your message for your planned
maintenance work.
Resetting the display
The message appears until the display
is permanently reset. The message then
appears again once the next interval is
reached.