Removing the shipping struts
The display will remind you to remove
the shipping struts.
Risk of damage due to failure to
remove the shipping struts.
Failure to remove the shipping struts
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the shipping struts as de-
scribed in "Installation and connec-
tion".
Confirm that the shipping struts have
been removed with the
control.
Continue setting up as described in the Op-
erating instructions
Confirm the message with the
sensor control.
OK
Completing the commissioning
process
To complete the commissioning
process, the Normal program must be
run without laundry and without deter-
gent.
If the power is interrupted prior to the
start of the first wash program (e.g., if
the machine is switched off with the
sensor control), the initial commis-
sioning process can be completed
again.
Once a wash program has been run-
ning for over 20 minutes, the initial
commissioning process does not have
to be performed again.
Turn on the faucets.
sensor
OK
appears in the display.
Initial commissioning
Touch the
Programs
Programs
Whites
Minimum iron
Normal
Touch the
Colors
Overview
Temperature
60 °C
Normal
Extras
not selected
1:07
h
Timer
Touch the Start/Stop sensor control.
When the program has finished, your
machine is ready for use.
If you have activated disinfection
programs, you must complete the
Thermal disinfection program as the
first program; make sure you use a
suitable detergent but do not load
the machine.
sensor control.
Express
Delicates
Woolens
sensor control.
Spin speed
1500
rpm
CapDosing
not selected
11:02
11:02
21