Troubleshooting - Silvercrest RT2000 Operating Manual

Troubleshooting

The equipment does not function as you want! Try and solve
the problem with the aid of the solutions proposed below.
Caution! Risk of burns through
hot radiator valve! Contact could
lead to hands being burned.
Allow the radiator to cool down before
completing any installation, disassembly
or repair work on the device! Wear work
gloves!
Battery icon appears in the display. Change
the batteries.
Fault message E1 appears in the display.
Adaptation of the device is not possible. Is the device
correctly assembled on the radiator? Follow the
instructions in Section Installation a 37 oldalon�
the device on the radiator and perform an adaptation.
Fault message E2 appears in the display.
The radiator valve stroke is too short or the battery
power is too weak. Adapt the device once again.
Change the batteries.
Due to the continuous thread, the pressure
piece fitted on the underside can drop out if
the regulator has not been mounted on the
valve. Insert the pressure piece. The continuous
thread turns and tightens the pressure piece. Fit
49
G