Installation; Disassembling The Old Thermostat Head - Silvercrest RT2000 Operating Manual

Installation

Caution! Risk of burns through hot radi-
ator valve! Contact could lead to hands
being burned. Allow the radiator to cool
down before completing any installation,
disassembly or repair work on the de-
vice! Wear protective gloves!
Installation of the device is easy. It is not necessary to drain
the heating water or alter the heating system. It is not nec-
essary to use any special tools or switch off the heating
system�
The union nut (1) permanently attached to the device fits on
all radiator valves with thread size M30 x 1.5 mm from the
most common manufacturers, e.g. Heimeier, MNG, Junkers,
Landis&Gyr (Duodyr), Honeywell-Braukmann, Oventrop
type A, Oventrop AV6, Schlösser, Comap D805, Valf, San-
ayii, Mertik Maxitrol, Watts, Wingenroth (Wiroflex) R.B.M,
Tiemme, Jaga, Siemens, Idmar.
The adapters contained in the supply package enable the
device to be fitted to Danfoss RA, Danfoss RAV and Dan-
foss RAVL radiator valves.

Disassembling the Old Thermostat Head

1�
Set the thermostat head (12) to the maximum radiator
value (11).
This means the thermostat head is no longer pressing on
the spindle of the radiator valve and can be removed more
easily�
37
G