Download Print this page

Sealey LSTART810 Instructions page 2

Li-ion jump starter/power pack 810a 12v

Advertisement

1.3.1. The Electricity At Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested
by a qualified person, using a Portable Appliance Tester (PAT), at least once a year.
1.3.2. The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of the appliance and
the safety of the appliance operator. If in any doubt about electrical safety, contact a qualified electrician.
DO ensure that the insulation on all cables and the product itself is safe before connecting to the mains power supply.
1.3.3
1.3.4. DO ensure that cables are always protected against short circuit and overload.
1.3.5. DO regularly inspect power supply, leads, plugs for wear and damage and power connections to ensure that none is loose.
DO check product voltage is the same as power supply to be used and check that all fused plugs are fitted with the correct capacity
1.3.6
fuses.
2. INTRODUCTION & SPECIFICATION
Powered by lithium-ion technology and fully protected against reverse charging and overload. The LSTART range of start/power packs
benefit from being compact and lightweight yet have high amperage outputs. Li-ion batteries have numerous advantages over lead acid,
including a flat discharge curve. This ensures a greater and extended performance and holds the charge for up to 5 times longer with high
energy density levels giving more battery power per gram. The range includes three models starting with the LSTART235 (Max. 235A),
LSTART405 (Max. 405A) and the professional LSTART810 (Max. 810A). All units are fitted with a USB socket for powering or charging a
variety of small electronic devices including mobile phones, MP3 players and tablet PCs. The LSTART810 is aimed at the professional user
and is also fitted with a 12V accessory socket and a 12V EOBD plug, so the unit can act as a memory saver during vehicle diagnostics. All
units come supplied with AC 12V 1A Charger and 12V accessory socket and in-vehicle charger lead.
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LSTART810
Cold Cranking Amps: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .810A
Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12V
Auxilliary Output: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB 5V/2A, 12V Accessory Socket
Cable & Clamp Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500mm
Size (L x D x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 x 160 x 45mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2kg
Maximum Starting Capacity: . . . . . . . . . 6000cc 8 cylinder Petrol, 3500cc 6 cylinder Diesel Engine
EOBD Cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2m
fig.1 Front Panel
fig.2 Left Side Panel
fi g.4 Accessory Leads
© Jack Sealey Limited
1
Charging Socket
2
Low Battery Warning
3
Side Work Light
4
12V Outlet / Memory
Saver Socket
Original Language Version
1
Power Button
2
Battery Status Bar
3
Jump Start Button
4
SOS/Jump Start Lamp
5
White Warning Light
6
Light/SOS Button
7
Side Light Button
8
USB (5V) Outlet
fig.3 Right Side Panel
1
Booster Lead
2
Mains (230V) Charger
3
12V Charger
4
Memory Saver (EOBD)
LSTART810
1
Booster Outlet
Socket
2
Side Work Light
Issue No: 1 -16/09/13

Advertisement

loading