IBM Power Systems 7063-CR1 Service Manual page 26

Table 1. OEM record de specific log information and service action (continued)
OEM record de specific log information
16xxxxxxxxxx
1Cxxxxxxxxxx
22xxxxxxxxxx
2Dxxxxxxxxxx
30xxxxxxxxxx
31xxxxxxxxxx
34xxxxxxxxxx
37xxxxxxxxxx
3Fxxxxxxxxxx
4Dxxxxxxxxxx
4Fxxxxxxxxxx
55xxxxxxxxxx
56xxxxxxxxxx
5Cxxxxxxxxxx
This ends the procedure.
9. Scan the SELs for an event with the value OEM record df. Did you find a SEL with the value OEM
record df?
If Then
Yes: Continue with the next step.
No: Go to step 15 on page 12.
10
Problem analysis, system parts, and locations for the 7063-CR1
Service action
Go to Getting fixes and update the system firmware to
the most recent level of firmware that is available. If this
SEL event continues to be logged, go to "Collecting
diagnostic data" on page 35. Then, go to "Contacting
IBM service and support" on page 35.
Go to Getting fixes and update the system firmware to
the most recent level of firmware that is available. If this
SEL event continues to be logged, go to "Collecting
diagnostic data" on page 35. Then, go to "Contacting
IBM service and support" on page 35.
Go to the "EPUB_PRC_MEMORY_PLUGGING_ERROR
isolation procedure" on page 30.
Go to the "EPUB_PRC_FSI_PATH isolation procedure"
on page 30.
Go to the "EPUB_PRC_PROC_AB_BUS isolation
procedure" on page 31.
Go to the "EPUB_PRC_PROC_XYZ_BUS isolation
procedure" on page 31.
Go to Getting fixes and update the system firmware to
the most recent level of firmware that is available. If this
SEL event continues to be logged, go to "Collecting
diagnostic data" on page 35. Then, go to "Contacting
IBM service and support" on page 35.
Go to the "EPUB_PRC_EIBUS_ERROR isolation
procedure" on page 31.
Go to the "EPUB_PRC_POWER_ERROR isolation
procedure" on page 32.
Go to Getting fixes and update the system firmware to
the most recent level of firmware that is available. If this
SEL event continues to be logged, go to "Collecting
diagnostic data" on page 35. Then, go to "Contacting
IBM service and support" on page 35.
Go to the "EPUB_PRC_MEMORY_UE isolation
procedure" on page 32.
Go to the "EPUB_PRC_HB_CODE isolation procedure"
on page 33.
Go to the "EPUB_PRC_TOD_CLOCK_ERR isolation
procedure" on page 34.
Go to the "EPUB_PRC_COOLING_SYSTEM_ERR
isolation procedure" on page 34.