Ethernet Settings* (Not Supported Sunrise Service); Setting Up The Ethernet Connection Mode - Huawei Sunrise Internet Box 5G User Manual

3.8 Ethernet Settings* (not supported Sunrise service)

Note: configuration and potential issues related to Ethernet Settings (PPPoE Dial-up
Settings and Dynamic IP Settings) are not part of Sunrise Customer Services
support

3.8.1 Setting Up the Ethernet Connection Mode

This section describes how to set up the Ethernet connection mode and parameters.
Procedure
Step 1
Choose Network Settings > Ethernet > Ethernet Settings.
Step 2
Set the Sunrise Internet Box 5G's connection parameters according to the following
table.
Application
Scenario
The Sunrise Internet
Box 5G selects the
best network access
mode based on the
network environment.
Access the Internet
using a PPPoE
dial-up connection or
a dynamic IP
address.
You have the user
name and password
provided by your
network service
provider for the
PPPoE dial-up
connection.
The computer IP
address is
automatically
assigned by the
network service
provider.
Page 31
Configuration Method
1. Select Auto from the Connection mode drop-down list
Set Point-to-Point Protocol over Ethernet (PPPoE) and
2.
dynamic IP parameters. For details, see PPPoE
Dial-up Settings and Dynamic IP Settings
Select PPPoE + Dynamic IP from the Connection
1.
mode drop-down list
Set Point-to-Point Protocol over Ethernet (PPPoE) and
2.
dynamic IP parameters. For details, see PPPoE
Dial-up Settings and Dynamic IP Settings
1. Select PPPoE from the Connection mode drop-down
list.
2. Enter the user name and password provided by your
network service provider
3. Set the MTU
Select Dynamic IP from the Connection mode
1.
drop-down list
Select the Set DNS server manually check box, Enter
2.
Primary DNS server and Secondary DNS server
NOTE:
This step is optional. By default, the Sunrise Internet Box 5G
automatically obtains the Domain Name Server (DNS) address.
3. Set the MTU
Sunrise Internet Box 5G User Manual