Camera Recording - Hubsan X4 Instructions Manual

6 CAMERA RECORDING

Power o both the transmitter and the X4 before inserting or removing the SD card.
This camera quadcopter has two version: standard camera(resolution: 480P) version, and HD
camera(resolution: 720P) version.
6.1 480P camera module recording steps:
6.1.1 When the transmitter and X4 are paired, the blue lights situated inside the SD card slot will
stay on.
6.1.2 Press the button on the side of the quadcopter (near the SD card slot) to start recording. A
red light inside the SD card slot will blink when recording is in progress.
6.1.3 Press the button again to stop recording. The red light will stop blinking and the video will
be saved.
6.2 720P camera module recording steps:
6.2.1 When the transmitter and X4 are paired, the red and blue lights situated inside the SD card slot
will both come on. The camera may take several seconds to recognise the SD card. When the red
light goes o , the X4 is ready to record.
6.2.2 Press the button on the side of the quadcopter (near the SD card slot) to start recording. A red
light inside the SD card slot will blink when recording is in progress.
6.2.3 Press the button again to stop recording. The red light will stop blinking and the video will be
saved.
If you don't want to save the video, just power o the quad copter before you press the button again.
www.hubsan.com
09
H107C
THE HUBSAN X4