Panasonic AK-HRP1005G Operating Instructions Manual page 27

7 [KNEE] button
8 [DTL] button
Use this button to display the knee menus.
The menus will switch with each press of the button.
[KNEE] [WHITE CLIP] menu off (status screen)
"17 KNEE" (see page 80)
"18 WHITE CLIP" (see page 81)
Status displays
Lit The current value matches that configured in the reference file.
green:
Lit The current value does not match that configured in the reference file.
red:
Off: Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
Use this button to display the HD detail and UHD detail menus.
The button functions will switch with ROP menu setting.
When the [ROP SETTING] > [DTL BUTTON] setting is "HD":
Use this button to display the HD detail menus.
The menus will switch with each press of the button.
[HD DETAIL] [HD SKIN TONE DTL]
"20 HD DETAIL" (see page 83)
"23 HD SKIN TONE DTL" (see page 88)
"28 DNR" (see page 98)
When the [ROP SETTING] > [DTL BUTTON] setting is "UHD":
Use this button to display the UHD detail menus.
The menus will switch with each press of the button.
[UHD DETAIL] [UHD SKIN TONE DTL]
"21 UHD DETAIL" (see page 85)
"24 UHD SKIN TONE DTL" (see page 90)
"28 DNR" (see page 98)
When the [ROP SETTING] > [DTL BUTTON] setting is "SD":
Use this button to display the SD detail menus.
The menus will switch as follows with each press of the button.
[SD DETAIL] [DNR] menu off (status screen)
"22 SD DETAIL" (see page 87)
"28 DNR" (see page 98)
Status displays
Lit The current value matches that configured in the reference file.
green:
Lit The current value does not match that configured in the reference file.
red:
Off: Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
- 27 -
Parts and their functions
[DNR] menu off (status screen)
[DNR] menu off (status screen)