We have used very high quality components and taken great care in the CS2.3’s construction. Properly set up and used with good associated equipment, the CS2.3 will provide you with a great deal of musical enjoyment for many years.
To eliminate this effect, the THIEL CS2.3 can be used with the provided stabilizer pins. The stabilizer pins are pushed into three pre-drilled holes in the base under each speaker. The pin point penetrates the carpet and allows the speaker to rest firmly on the floor.
It is important to have enough power to play at the level you desire without distortion. If high sound levels are desired, the CS2.3’s are designed to be used with amplifiers rated up to 400 watts per channel (into 4 ohms). If you play the speakers more loudly than the volume the amplifier can cleanly produce, the amplifier will produce overload (clipping) distortion.
Page 5
GRILLE The CS2.3 grille is designed to not produce diffraction so there is no sonic reason to remove it. If you do need to remove the grille, pull the bottom of the grille frame away from the speaker an inch or so and then lift the grille upward to remove it.
THIEL warrants every THIEL model CS2.3 system against defects in materials and workmanship to the original owner for a period of ten years from the date of purchase. THIEL will, at no charge, replace any defective part and make any repairs necessary to ensure its proper performance when the defective unit is returned to us postpaid.
Need help?
Do you have a question about the CS2.3 and is the answer not in the manual?
Questions and answers