Firmware Version Display - Intellijel Quadrax Manual

Firmware Version Display
Quadrax's current firmware version is displayed for approximately 2 seconds when you power on the
module. It displays the firmware version in binary format using the 1.x.y format, with the left column
displaying the x value and the right column displaying the y
value.
In each column, the top LED is bit 0 and the bottom LED is
bit 3.
For example, the illustration on the right indicates firmware
version 1.5.2. The Major version (1.x.x) is implied, while the
left column (0101) is a "5" and the right column (0010) is a "2":
v1. 5.
1
0
1
0
(NOTE: The color of the Firmware Version Display LEDs
indicate whether Quadrax's AD, AHR, CYCLE and BURST
functions output 10V (blue) or 5V (green) signals, as
discussed in Inputs and Outputs
2
0 (bit 0)
1 (bit 1)
0 (bit 2)
0 (bit 3)
.)
Quadrax Manual
Page 35