Optional Accessories; Protecting The Environment - DeWalt DWE7491 Original Instructions Manual

English
In case workpiece fragments are jammed between saw blade
and guards, disconnect the machine from the power supply
and follow the instructions given in section Mounting the
saw blade. Remove the jammed parts and reassemble the
saw blade.
Keep the ventilation slots clear and regularly clean the housing
with a soft cloth.
Regularly clean the dust collection system:
1. Unplug the saw.
2. Turn the saw on its side, so the bottom, open part of the
unit is accessible.
3. Open the dust access door
the two screws and then by pressing the side clips
toward each other. Clean out the excess dust, and re-secure
by pushing the side clips completely into place then
tightening the lock screws.

Optional Accessories


WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
Replace blade guard when worn. Contact your local D
service centre for details on a blade guard replacment.
sAW BlADEs: ALWAYS USE 254 mm noise reduced saw blades
with 16 mm arbour holes. Blade speed rating must be at least
5000 RPM. Never use a smaller diameter blade. It will not be
guarded properly.
BlADE DEsCRiPTiOns
APPliCATiOn DiAMETER
Construction saw Blades (fast rip)
General Purpose 254 mm
Fine Crosscuts 254 mm
Woodworking saw Blades (provide smooth, clean cuts)
Fine crosscuts 254 mm
Consult your dealer for further information on the
appropriate accessories.
• DWE74911 Rolling Table Saw Stand
• DWE74912 Scissor Leg Stand

Protecting the Environment

Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
22
shown in Figure S loosening
44
45
WALT recommended
e
WALT
e
TEETh
24
40
60