Before Installing The Appliance - Miele KFN 37232 iD Operating And Installation Instructions

Installation
Weight of the furniture door

If the furniture door panel is too
heavy, this can cause damage.
Fitting a furniture door panel which is
heavier than the maximum permitted
weight could damage the hinges.
This can cause subsequent func-
tional problems.
Before fitting furniture doors, ensure
that the weight of the door does not ex-
ceed the maximum permitted:
Appliance
KFN 37232 iD
Fitting large or divided furniture
doors
When fitting large or divided furniture
doors an extra fitting kit or set of fixing
brackets should be used. These are
available to order from Miele.
56
Upper Lower
door in door in
kg kg
17 12

Before installing the appliance

 Take the accessory pack which in-
cludes installation parts and other ac-
cessories out of the appliance and re-
move the packaging strap holding the
door in place.
 Do not remove the following from
the back of the appliance:
– The spacers (depending on model)
These ensure the gap required
between the back of the appliance
and the wall is maintained.
– The bags (depending on model) loc-
ated inside the metal grille (heat ex-
changer).
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and are not
dangerous.
 Remove the cable clip from the back
of the appliance.