Table of Contents
Advertisement
Quick Links
Owner's Manual
The HI-E DRY Vehere Pool & Spa Humidity Controller featuring FOCUS™ Technology is the industries most
efficient, durable and economic product for controlling moisture related problems associated with indoor
pools, whirlpools, hot tubs, and therapy/lap pools.
Vehere delivers comfort and solves:
• Chemical Odors • Foggy Windows • Mold & Mildew • High Humidity Level
• Condensate and Structural Moisture Problems
The Vehere with FOCUS
Performance, Reliability & Comfort
The Vehere utilizes technology, which dramatically
improves performance, product reliability and comfort.
Performance - The Vehere's innovative heat transfer
technology offers our customers...
"HI-Efficiency" - A dehumidifier resulting in a compact
refrigeration system requiring less electric consumption.
This ensures the use of a standard 20 Amp electrical
outlet and LOW OPERATING COSTS!
"HI-Capacity" - Vehere's passive heat transfer process
allows the removal of more than 190 pints per day!
(80°F, 60% RH). That's two- three times more water
removal per kilowatt-hour of electricity than conventional
dehumidifiers.
Compact - The Vehere's stainless steel enclosure is
corrosion resistant with a built-in fan for low noise
operation. The Vehere features a cabinet mounted
or remotely located control, easy-roll casters, and the
highest dehumidification capacity available in it's class.
Reliability - Our compact design uses less refrigerant,
which reduces our cost and improves reliability. The
Vehere's HI-Efficiency operation can save thousands of
dollars annually.
Comfort - The Vehere provides airflows up to 540 CFM
(cubic feet/minute) of Dry Air. This airflow helps reduce
foggy windows, mold, mildew and condensate... all
reduced to increase indoor occupant comfort!
Toll-Free 1-800-533-7533
Installation, Operation & Service Instructions
Read and Save These Instructions
Technology is...
TM
—
HI-E Dry Vehere
HI-E Dry Vehere
P/N 4030050
1
HI-E-Dry Vehere
Part Number 4030050
www.thermastor.com • sales@thermastor.com
TS-623 02/12
Advertisement
Table of Contents
Related Manuals for Therma-Stor HI-E Dry Vehere
Summary of Contents for Therma-Stor HI-E Dry Vehere
-
Page 1: Precautions
Installation, Operation & Service Instructions Read and Save These Instructions The HI-E DRY Vehere Pool & Spa Humidity Controller featuring FOCUS™ Technology is the industries most efficient, durable and economic product for controlling moisture related problems associated with indoor pools, whirlpools, hot tubs, and therapy/lap pools. -
Page 2: Table Of Contents
200 percent increase in overall efficiency. 2 Specifications Model: HI-E Dry Vehere Electrical: 110-120 VAC, 12.0 Amps, grounded (7’ power cord included) Compressor LRA: 63 Amps Capacity: 192 pints/day @ 80°F, 60% RH... -
Page 3: Vehere Diagram
2.1 Vehere Diagram A - Air Intake B - Humidity Sensor/Control C - Filters D - Air Exhaust E - Fan Switch F - Power Cord G - Drain Hose 36.5” Figure 1: Vehere diagram. Figure 3: Installation in humid area with no ducting Toll-Free 1-800-533-7533 3 Installation Options 3.1 Location... -
Page 4: C In Humid Area, Duct Inlet And/Or Outlet
Optional Exhaust Ventilator Low = 165 CFM high = 290 CFM Dehumidistats Quiet-Vent remote Vehere Figure 4: Installation in humid area with ducting. 3.1C In Humid Area, Duct Inlet and/or Outlet If the pool room is very large or has high ceilings, dehumidification can be improved by adding an inlet and/ or outlet duct to circulate and destratify stagnant areas. -
Page 5: Mounting The Humidity Sensor/Controller
Mount the wall mount element at a height of 4 to 6 feet (1.2 to 1.8 m) above the floor. To mount the HI-E DRY Vehere dehumidistat on a wall for remote application, first remove the cover from the controller by lifting the side of the controller cover over the catch tabs on both sides. -
Page 6: Operation
the following points: The Vehere will require a single 12” round or equivalent dedicated return from the pool room. The Vehere supply can be dedicated or tapped into a forced air system supply. A check damper should be used at the connections. The warm/dry supply air should be washed over the windows at multiple drops for best results. -
Page 7: Ventilation
WARNING: Do not use open combustion heating appliances (unless equipped with power exhaust) in a pool room equipped with exhaust fans. Under certain conditions these exhaust fans may cause the backdrafting of toxic combustion by-products which are hazardous to human health and could cause death. We strongly recommend using only closed combustion heating appliances. -
Page 8: Refrigerant Charging
1. Defrost thermostat loose or defective 2. Low refrigerant charge 3. Dirty air filters or airflow restricted. 7.3 Refrigerant Charging WARNING: Only qualified service people should service this unit. The Vehere has a high-pressure refrigerant system and high voltage circuitry. This could present a hazard which could result in death, serious bodily injury, and/or property damage. -
Page 9: Vehere Electrical Wiring Diagram
9 Vehere Electrical Wiring Figure 12: Vehere wiring diagram. Toll-Free 1-800-533-7533 www.thermastor.com • sales@thermastor.com... -
Page 10: Service Parts
Service Parts List: HI-E DRY Vehere Dehumidifier ITEM PART NO. QTY. DESCRIPTION 4021083 Blower with Capacitor 4028249 Capacitor, Run, 50MFD, 370v 4021589 Capillary Tubes 4023604 Caster, 2”, Plastic, Swivel 4028246 Coil, Condenser 4028245 Coil, Evaporator 4030131 Compressor 4030121 Compressor Overload... -
Page 11: Warranty
Therma-Stor LLC’s reasonable control. If any HI-E Dry Vehere part is repaired or replaced, the new part shall be warranted for the balance of original warranty (but all warranty periods will be extended by the period of time, if any, that the Vehere is out of service while awaiting covered warranty service).
Need help?
Do you have a question about the HI-E Dry Vehere and is the answer not in the manual?
Questions and answers