Table of Contents
Advertisement
16 Operation
C. HOW TO USE THE X INPUT
If a voltage is applied to both amplifiers, these voltages can be compared
with each other and their relationships can be made visible.
Some of these applications are also mentioned in chapter III.
- Connect the voltages to be compared to the input sockets "DC (AC) Y
AMPL." and "DC (AC) X AMPL.".
- Place switches "Y AMPL." and "X AMPL." in the desired position.
- Set the continuous control "X AMPL" to position " X 1".
The picture can now be brought on the screen by means of the shift con-
trols "jYf" and "<-X-»-".
In order to obtain good stationary pictures, the voltages on the two
amplifier inputs should be synchronous.
•
Advertisement
Table of Contents
