On-Board Memory - Logitech G304 LIGHTSPEED Faq





Assign Shift — You can quickly activate a DPI level when you press the DPI
o
Shift button. For example, you can set Assign Shift to a low DPI value, which
will temporarily give you extreme precision. When you release the button, the
mouse will revert back to the current DPI level. To set the Shift DPI, select a DPI
level that isn't highlighted in orange, and then click Assign Shift.
TIP: Buttons you assign as DPI Up, DPI Down, DPI Shift and DPI Cycling will enable
you to change between DPI levels rapidly.
2. In Performance Mode, change the Report Rate, if you prefer something other than the
default of 1000 reports/second (1ms response time). The Report Rate controls how often
your mouse updates its position to the computer.
NOTE: The report rate setting cannot be changed while the gaming mouse is in
endurance mode. Switch to performance mode if you want to increase the report rate.
The possible range is from 125/sec (8ms response time) to 1000/sec (1ms response time).
You can:
o Decrease processor use by reducing the report rate.
o Increase the mouse response by raising the report rate.
o Extend battery life by reducing the report rate.
3. Make your preferred selections under Advanced. The options are:
Enable per profile pointer settings — Select this option to enable each profile in
o
LGS to have different pointer behavior (see Setting different DPIs for gaming-
mouse profiles using Logitech Gaming Software for help).
Acceleration (Enhance Pointer Precision) — Select this option to use Window's
o
"Enhance Pointer Precision" acceleration.
TIP: For gaming accuracy, we recommend leaving this unchecked, but you can
enable it if you prefer the feel of default Windows acceleration.
Power mode — Click on the drop-down menu and select between HI for
o
performance mode and LO for endurance mode. Report rate is fixed at 8ms while
endurance mode is active to conserve battery life. In performance mode, the
possible range is from 125 reports/sec (8ms response time) to 1000 reports/sec
(1ms response time). For more information, see
power modes on the G304 and G305 gaming

On-Board Memory

In On-Board Memory mode, all of the customizations you make will be written directly to the
mouse.
Your gaming mouse supports these pointer customizations in On-Board Memory mode:
DPI levels — Configure up to five levels, from 200-12000 in 50 DPI increments.

Press the default DPI button
Switch between profiles
Power up the computer
Wake the computer from sleep mode
Performance and Endurance
mice.