Do you have a question about the LIGHTSPEED G305 and is the answer not in the manual?
Questions and answers
Carolyn Collins
March 19, 2025
connect connect lightspeed G305 wireless mouse to my imac. Mouse not showing up in my bluetooth settings.
2 comments:
Mr. Anderson
March 19, 2025
The Logitech LIGHTSPEED G305 wireless mouse does not use Bluetooth. It connects via the included LIGHTSPEED USB receiver. To connect it to an iMac:
1. Insert an AA battery into the mouse. 2. Remove the LIGHTSPEED USB receiver from the battery compartment. 3. Plug the receiver into a USB port on the iMac. 4. Turn on the mouse using the switch on the bottom. 5. If the mouse does not work, download and install Logitech G HUB software to check for updates or reconfigure settings.
If the mouse is unpaired, use the Logitech Connection Utility to pair it with the receiver.
Page 2
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS Important Safety, Compliance and Warranty Information Informations importantes concernant la sécurité, la mise en conformité et la garantie...
SETUP INSTRUCTIONS Remove the battery cover by pressing the top of the cover and pulling it downwards Remove the receiver Insert the battery Close the battery cover Make sure the mouse is turned on via the switch on the bottom of the mouse 3 ENGLISH...
Page 4
Recommended: Insert receiver into the receiver extension cable Insert extension cable into your USB port Alternatively, insert receiver directly into your USB port Download the G HUB software logitechG.com/GHUB logitechG.com/support 4 ENGLISH...
Page 5
Tips: – To make your mouse lighter, a lithium AA battery (not included) can be used – Keep the mouse and receiver 2 m+ away from wireless routers or other 2 4GHz wireless devices to minimize environmental noise – G304 / G305 has a wireless range of up to 10 meters To ensure optimal performance in noisy wireless environments, it is recommended to keep the receiver within 20 cm of the mouse...
Page 6
6 FULLY PROGRAMMABLE BUTTONS Left (Button 1) Right (Button 2) Wheel click (Button 3) Forward (Button 4) Back (Button 5) DPI cycle (Button 6) On/Off switch (bottom of mouse, not programmable) 6 ENGLISH...
Need help?
Do you have a question about the LIGHTSPEED G305 and is the answer not in the manual?
Questions and answers
connect connect lightspeed G305 wireless mouse to my imac. Mouse not showing up in my bluetooth settings.
The Logitech LIGHTSPEED G305 wireless mouse does not use Bluetooth. It connects via the included LIGHTSPEED USB receiver. To connect it to an iMac:
1. Insert an AA battery into the mouse.
2. Remove the LIGHTSPEED USB receiver from the battery compartment.
3. Plug the receiver into a USB port on the iMac.
4. Turn on the mouse using the switch on the bottom.
5. If the mouse does not work, download and install Logitech G HUB software to check for updates or reconfigure settings.
If the mouse is unpaired, use the Logitech Connection Utility to pair it with the receiver.
This answer is automatically generated
@Carolyn Collins