Making Connections With Your New AM/FM Tower Radio tuners and receivers can have different connections for your new Tower antenna. Please find the connection that best matches your tuner or receiver and follow the listed instructions. FM Connections: 75 Ohm Coaxial: Your TERK antenna has a Slip-On Coaxial connector on the FM lead.
Page 3
AM Connections: AM Push-Button Connection: Your TERK antenna uses a Twin Lead Bare Wire for AM connections. If your radio tuner or receiver has a Push-Button connection, simply slip the bare wires into the push button connections. For a Screw Terminal connection, for wrap the bare wires around the screw terminals and tighten.
Page 4
Locating Your AM/FM Tower For Best Results 1. All antennas are affected by electromagnetic fields. To maximize performance, position your AM/FM Tower antenna away from direct contact with receivers, tuners, CD players, TVs and computers. Note: Antennas work best when CD players, VCRs and computers are turned off.
Page 5
Helpful Information About Your AM/FM Tower Remember that no antenna can receive a radio signal that isn’t there. When a usable radio signal is present, your AM/FM Tower will improve AM and FM reception. Note: Generally, a practical limit to radio reception is 40-50 miles from the broadcast transmitter depending on the terrain.
Limited Warranty TERK TECHNOLOGIES CORP. (TERK) warrants this product against defects in materials or workmanship for one year from the date of purchase. During this warranty period, this product will be repaired or replaced, at TERK’s option, without charge. Please read your instructions thoroughly and use this product only as directed. This warranty does not cover any damage due to commercial use, accident, misuse, abuse, or negligence.
Need help?
Do you have a question about the AM/FM Tower Powered Indoor Antenna and is the answer not in the manual?
Questions and answers