Page 1
EQUIPMENT Instruction Sheet ® ® Loctite Zeta 7411-S Shutter System Assembly Part Number 98420 Installation Instructions: 1. Remove shutter assembly from the shipping box. ® 2. The Zeta 7411-S unit should be cool and unplugged. The cable assembly to the lamp head should also be unplugged.
Page 2
7. Locate (4) #8-32 x 2 1/2 Phillips Pan Head Screws included with the shipment. Also, observe the flush mounted connector on the shutter’s topside. This connector will mate ® with the flush mounted connector on the front underside of the Zeta 7411-S Lamp Assembly.
Page 3
WHITE WARRANTY Henkel expressly warrants that all products referred to in this Instruction Manual for Loctite® ZETA® 7411-S Shutter System (hereafter called “Products”) shall be free from defects in materials and workmanship. Liability for Henkel shall be limited, as its option, to replacing those Products which are shown to be defective in either materials or workmanship or to credit the purchaser the amount of the purchase price thereof (plus freight and insurance charges paid therefor by the user).
Need help?
Do you have a question about the Zeta 7411-S and is the answer not in the manual?
Questions and answers