Preface - Geutebruck G-Cam/E2 Series Installation Manual

G-Cam/E2 Series

Preface

The information given in this manual was current when published. The company
reserves the right to revise and improve its products. All specifications are subject to
change without notice.
Copyright
Under copyright laws, the contents of this user manual may not be copied,
photocopied, translated, reproduced or reduced to any electronic medium or
machine-readable format, in whole or in part, without prior written permission of the
company.
© 2018 by GEUTEBRÜCK All Rights preserved.
Notice
Mounting instructions for Dome Systems and permanently mounted
Cameras especially for Pole Mount.
Please note that the place of mounting should be stiff enough to counter strong
wind or other vibrations!
Otherwise all VCA functions like Motion Detection, Privacy Masking, etc. either in
cameras or with DVRs could be disturbed heavily and can cause unliked and often
alarms. In some cases mechanical problems or defects can be the result of such
vibrations, like overheating of focus motors caused by persistant mast shaking!
This manual provides the installation information for the Outdoor 4K UHD Fix Dome
IP Camera. To work with the Dome Cameras, any installer or technician must have
the following minimum qualifications:
A basic knowledge of CCTV systems and components

A basic knowledge of electrical wiring and low-voltage electrical hookups

A basic knowledge of network system setting

Have read this manual completely

Important Information
Before proceeding, please read and observe all instructions and warnings in this
manual. Retain this manual with the original bill of sale for future reference and, if
necessary, warranty service. When unpacking the unit, check for missing or
damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL
OR OPERATE THIS PRODUCT. Contact the dealer for assistance.
Installation
2