Geutebruck G-Cam/EFD-2251 Installation Manual
  1. Manuals
  2. Brands
  3. Geutebruck Manuals
  4. Security Camera
  5. G-Cam/EFD-2251
  6. Installation manual

Geutebruck G-Cam/EFD-2251 Installation Manual

Full hd ip fix dome camera
Hide thumbs Also See for G-Cam/EFD-2251:
Table of Contents

Advertisement

Quick Links

G-Cam/EFD-2251
Full HD IP Fix Dome Camera
Installation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G-Cam/EFD-2251 and is the answer not in the manual?

Questions and answers

Related Manuals for Geutebruck G-Cam/EFD-2251

Summary of Contents for Geutebruck G-Cam/EFD-2251

  • Page 1 G-Cam/EFD-2251 Full HD IP Fix Dome Camera Installation...

  • Page 3: Preface

    Preface The information given in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice. Copyright Under copyright laws, the contents of this user manual may not be copied, photocopied, translated, reproduced or reduced to any electronic medium or machine-readable format, in whole or in part, without prior written permission of the company.

  • Page 4: Regulation

    G-Cam/E2 Series Installation Regulation This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This symbol on the product or on its packaging indicates that this product shall not be treated as household waste in accordance with Directive 2002 / 96 / EC.

  • Page 5: Warnings And Cautions

    G-Cam/E2 Series Installation Warnings and Cautions Handle the camera carefully  Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. Installing electricity wiring carefully  Ask qualified personnel of electrical wiring for the installation. Please note the technical specifications for correct power supply at the end of this manual.

  • Page 6: Dome Cover Cleaning Guide

    G-Cam/E2 Series Installation Dome Cover Cleaning Guide Dirt or dust on the surface of a Dome camera can blur the image. The following describes how to correctly clean the dome cover of a Dome camera. NOTE: If the dome cover is scratched, please contact the distributor for replacement.

  • Page 7: Kinds Of Dirt And Cleaning Methods

    G-Cam/E2 Series Installation Kinds of dirt and cleaning methods According to different scenarios, ways to clean the dome surface will also vary. Refer to the following to proceed. Scenario 1: Only little dirt or dust is attached to the dome surface. Solution: Put on the rubber gloves and simply use rubber air blower or air gun with air compressor to blow off dirt...

  • Page 8: Table Of Contents

    G-Cam/E2 Series Installation Table of Contents Preface ..........................2   Regulation .......................... 3   Warnings and Cautions ..................... 4   Dome Cover Cleaning Guide .................... 5   Kinds of dirt and cleaning methods ....................6  1. FEATURES ........................8   2.

  • Page 9: Features

    G-Cam/E2 Series Installation 1. FEATURES Camera  Full HD outdoor dome IP camera (Vandal proof)  High quality compression in real time streaming  1/2.9” Sony STARVIS Exmor CMOS Image Sensor  True Day / Night (ICR)  True WDR ...

  • Page 10: Package Contents

    G-Cam/E2 Series Installation 2. PACKAGE CONTENTS Unpack carefully and handle the equipment with care. The packaging contains: Camera DC power adaptor & plugs DC jack cable Terminal block Installation Template Screws (M4 x 30), plastic anchors + O-rings Silicon waterproof band Hex wrench (3 mm) Quick installation guide Ferrite core...

  • Page 11: Part Names

    G-Cam/E2 Series Installation 3. PART NAMES  ③ ② ④ ① * Models herein and their appearance are subject to change without any prior notice. ① Terminal connector Connector for cable connection of digital input/output, audio input/output, and DC12V power. Refer to 5.CONNECTIONS for more information.

  • Page 12: Installation

    G-Cam/E2 Series Installation 4. INSTALLATION 4.1 Installing the camera 4.1.1. Installation without bracket Installation Template (Unit: mm) Installation template’s image size scale in this installation guide is not 1:1. The correct-size template design paper can be found inside the package separately.
  • Page 13 G-Cam/E2 Series Installation 1) Place the installation template (paper) that is included in the package on the desired installation surface. 2) Drill three holes in correct positions based on the template paper, and insert anchor blocks into the holes. If you need to insert cables through the mounting surface, drill an adiitional hole into it, so that the cable(s) can pass.

  • Page 14: Compatible Accessories

    G-Cam/E2 Series Installation 4.1.2. Compatible accessories - 5.02071 G-Cam/EBFC-002 (in-ceiling adapter for outdoor fixdome) - 5.02072 G-Cam/EBWM-001 (Wall mount bracket for E2 EFD) in comb. with 5.02083, G-Cam/ECMA-002 corner mount adapter oder 5.02082, G-Cam/EPMA-004 pole mount adapter) - 5.02080 G-Cam/EBWM-005 (Wall mount bracket for E2) with adapter 5.02085, G-Cam/EBDA-200 only.

  • Page 15: Setting The Lens Position

    G-Cam/E2 Series Installation 4.1. Setting the Lens Position Instruction below describes how to set the lens positions and manually adjust zoom and focus. First remove the dome cover. 1. Perform the panning adjustment by turning the Gimbal Bracket gimbal bracket horizontally either clockwise or counter-clockwise.

  • Page 16: Adjusting Zoom And Focus

    G-Cam/E2 Series Installation 4.2. Adjusting zoom and focus To be able to adjust zoom and focus, it is necessary to connect the device to a network. Please refer to 6.CONFIGURATION for the detailed method of network connection. Once the device is on the network and the webpage is open, go to Setup> Video & Audio > Zoom/Focus.

  • Page 17: Setting The Image Attributes

    G-Cam/E2 Series Installation 4.4. Setting the image attributes On the camera’s webpage, users can configure image settings. The camera image’s brightness, contrast, saturation and sharpness are adjustable. You find the settings under Setup > Video & Audio > Camera. For more detailed information, refer to the webpage user’s manual.

  • Page 18: Connections

    G-Cam/E2 Series Installation 5. CONNECTIONS ⑤     Reserved DO (N.O.) AUDIO DC12V X X C 1 C 1 O − + ① Alarm (DO) connection Only the relay type is supported. Relay Rating: Max 24VDC 50mA Do not exceed the maximum relay rating. Internal Device Relay Type...
  • Page 19 G-Cam/E2 Series Installation Internal +3.3V Internal Output Output Voltage Type Relay Type ③ Audio Connection The camera provides a mono audio input and output. Due to low audio output power, an amplified speaker is recommended for enhanced sound (Refrain from connecting a headphone or an earphone directly to the camera).

  • Page 20: Configuration

    G-Cam/E2 Series Installation 6. CONFIGURATION 6.1. Set up network environment Be sure that the device and PC are on a same area network before running the installation. 6.1.1. Custom IP Environment IPAdminTool is provided on attached CDRom. IPAdminTool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, device reboot, and device organizations.

  • Page 21: View Video On Web Page

    G-Cam/E2 Series Installation 6. Web streaming and device configurations are supported through ActiveX program. When the ActiveX installation window appears, authorize and install the ActiveX. 6.2. View video on web page Once the device’s proper IP address has been identified, type the URL in a web browser to access the camera.

  • Page 22: View Video Using Ipadmin Tool

    G-Cam/E2 Series Installation 6.2.1. View video using IPAdmin Tool IPAdminTool automatically searches all activated network encoders and IP cameras and shows the product name, IP address, MAC address and etc. IPAdminTool is provided on attached CDRom. 1. From the IPAdminTool’s product list, select the device by highlighting it. 2.

  • Page 23: Configuration In Geutebrück Gscsetup

    G-Cam/E2 Series Installation 6.3. Configuration in GEUTEBRÜCK GscSetup Start the software "GscSetup" by double clicking on the desktop icon. Double click on "local" (1). Click on "Hardware" (2). The “Hardware module list” will open. With a right click on "Hardware module list" (1) you will open a pop up window. Click on button "Add".
  • Page 24 G-Cam/E2 Series Installation Please scroll to the camera Plugin <E2 IPC> (32) and doubleclick on it. The chosen module (1) appears as "IP-Camera Plugin 001" in the "Hardware module list" (see next figure). The name can be changed (e.g. G-Cam_E001 Camera 1). Click the icon on the toolbar to send your choice to the server (1).
  • Page 25 G-Cam/E2 Series Installation Now you must assign a media channel to transmit the camera’s pictures. Please click in "General settings" on the menu item "Media channels" (1). A list of the available media channels appears. Click the icon "Add" (2) on the toolbar to add a new media channel. Mark the new media channel with click.

  • Page 26: Advanced Configuration

    G-Cam/E2 Series Installation 6.3.1. Advanced configuration In the hardware configuration you can make advanced settings like the streaming behaviour (see following screenshots). Please note, that the configurations made here will overwrite the webbrowser configurations! PTZF Move doesn’t apply to Box cameras. Please note, that the configurations made here will overwrite the webbrowser configurations!
  • Page 27 G-Cam/E2 Series Installation Click the icon on the toolbar to send your choice to the server. Please note, that the configurations made here will overwrite the webbrowser configurations! Close the GSCSetup software. Start the GSCView software with a double click on the desktop icon GSCView. By click on the camera’s media channel (1) the camera’s video stream will be shown on the selected viewer.

  • Page 28: Configuration In Geutebrück G-Set

    G-Cam/E2 Series Installation 6.4. Configuration in GEUTEBRÜCK G-Set NOTE: For correct installation of IP cameras one Option G-Core/CamConnect must be available for each camera. Available options are shown in G-Set at General settings - Options. Required options can be ordered using General settings - Options in G-Set. After clicking on Options, the options dialog opens with the first tab, which shows an overview of the available options.
  • Page 29 G-Cam/E2 Series Installation Right clicking this URL opens a menu in which the URL can be copied, saved or opened in the default browser. After passing the URL to a browser, follow the instructions on the GEUTEBRÜCK website. Adding IP Cameras Please double click at desktop on the G-Set icon to open the G-Set configuration menu.
  • Page 30 G-Cam/E2 Series Installation The Media Channel Wizard automatically searches for existing network cameras and displays them in the first column. Cameras for which access rights are available are also displayed with a small camera image. You can now select the desired camera by clicking the tick box (changes to green) and edit the general information and the camera-specific data.
  • Page 31 G-Cam/E2 Series Installation Step 3: Summary (check settings, confirm and transfer settings to the server). Mouse click on tab Summary provides you with an overview of all the settings that have been defined for your cameras. Please confirm your settings by clicking the button Save & Finish. IMPORTANT: For settings to take effect, they must be sent to the server by clicking the icon You can find the transfer button...

  • Page 32: Reset

    G-Cam/E2 Series Installation 6.5. Reset Camera 1. While the device is in use, press the Reset button. 2. Wait for the system to reboot. Do not press the reset button longer than 2 seconds, otherwise the camera may be switched to its factory default settings. Webpage 1.

  • Page 33: Appendix (A): Specifications

    G-Cam/E2 Series Installation APPENDIX (A): SPECIFICATIONS Technical specifications G-Cam/EFD-2251 Image sensor (Chip) 1/2,9" CMOS (SONY Starvis Exmor) Picture format 16:9, 4:3 Scanning system Progressive scan Mega pixel 2 MP (Full HD) Minimum sensitivity 0.2 Lux (color), 0 Lux (B/W; IR LEDs on)
  • Page 34 PSU (12 VDC/1.25 A) G-Cam/PoE-Adapter-04 (5.03034) - PoE adapter 15.4 W G-Cam/EBFC-002 (5.02071) - Bracket false ceiling Optional accessories G-Cam/EBWM-005 (5.02080) - Wall mount bracket G-Cam/EBCE-003 (5.02081) - Ceiling mount bracket G-Cam/EBDA-200 (5.02085) - Adapter for E2 EFD Brand GEUTEBRUCK Order No. 5.02026...

  • Page 35: Appendix (B): Power Over Ethernet

    G-Cam/E2 Series Installation APPENDIX (B): POWER OVER ETHERNET The Power over Ethernet (PoE) is designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard. IEEE 802.3af allows for two power options for Category 5 cables. The IEEE 802.3af-2003 standard allows up to 15.4 W power to device.

  • Page 36: Appendix (C): Vca Video Content Analytics

    G-Cam/E2 Series Installation APPENDIX (C): VCA Video Content Analytics Introduction VCA (Video Content Analysis) is a real-time video analytics engine that utilizes advanced image processing algorithms to turn video into actionable intelligence. At the core of the product is an advanced object tracking engine that continually tracks moving and stationary targets.
  • Page 37 G-Cam/E2 Series Installation VCAprofessional (full range of packages): optimized for specific scenarios. Contact your supplier for up to date information about the packages available for different platforms. Counting Tamper detection Intrusion detection Shake cancellation Enter&exit filters Dwell filter Direction filter Zones &...

  • Page 38: Appendix (D): Dimensions

    G-Cam/E2 Series Installation APPENDIX (D): DIMENSIONS (Unit: mm)

  • Page 39: Appendix (E): Hexadecimal-Decimal Conversion Table

    G-Cam/E2 Series Installation APPENDIX (E): HEXADECIMAL-DECIMAL CONVERSION TABLE Refer to the following table when you convert the MAC address of your device to IP address. Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec 6F 111 B9 185 DE 222 BA 186...
  • Page 40 GEUTEBRÜCK GmbH Technische Änderungen vorbehalten. Im Nassen 7-9 | D-53578 Windhagen Tel. +49 (0)2645 137-0 | Fax-999 Technical alterations reserved. Sous réserve des modifications. info@geutebrueck.com Suministro sujeto a modificaciones técnicas o disponibilidad. www.geutebrueck.com...

Table of Contents