Generaloperation - Sanyo FXC-503LD Operating Instructions Manual

CAUTION
Do not attempt to remove the panel in a manner other than that described above.
l
When installing the panel, do not force it into the unit.
l
Do not touch the connection terminals of the panel or the unit. It may cause poor contact.
l
Use a clean, dry cloth when cleaning the terminals.
l
Keep the panel out of direct sunlight and high temperatures.
l
Prevent the panel from coming into contact with benzine, thinner, or insecticides.
l
Do not drop the panel.
l
GENERAL OPERATION
TURNING ON THE UNIT
Install the front panel and press button 0.
FUNCTION OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Press button @ to stop operation.
ELECTRONIC CONTROLS . . . . . . . . . . . . . . . . . .
Press button @ to select the audio functions as shown in the table below.
To adjust the volume, press button @I (either the @ or 8 side) while in the volume mode.
To adjust the sound quality, balance or fader, press button @I to select the operation mode, then press the @or
Note
While the mode is not displayed, press button @I and the vokme will be adjusted.
1 2 5 6 7
MODE
Down
Down
Down
Left
Front
1
2, 3
0 3 2
UP
-5 Up
-5 Up
L15 Right
R 1 5
F15
Rear R 1 5