Service; Tilting The Ironing Table Horizontally; Opening The Heater Plate Cover; Figure 020-4: Handle (Locking Catch) - Miele B 890 Technical Information

Technical Information
Remedy:
1. Check the input voltage to the heater plate.
2. Check the output voltage to the heater plate.
3. If there is input voltage but no output voltage, replace the main electronic.
See Section 010-4.2.
4

Service

4.1

Tilting the Ironing Table Horizontally

Figure 020-4: Handle (Locking Catch)

1. Lift the handle (locking catch) at the right under the table and hold the
table.

Figure 020-5: Locking the Iron in Place

2. Tilt the ironing table until it is horizontal and locks into place.
4.2

Opening the Heater Plate Cover

1. Tilt the ironing table to its horizontal position; see Section 020-4.1.
2. Switch on the machine.
3. Operate the foot switch to lower the heater plate onto the roller.
4. Switch off the machine and unplug it from the power supply.
24
B 890/B 990