5 - 4
FX Series RFID Readers Integrator Guide
Back Room Receiving
Example Parameters
The reader reads 500 tags in five seconds within a distance of 10 feet.
Installation
•
Four AN480 antennas are installed in a double-sided portal configuration. One pair of antennas is mounted
two feet above the floor and the second pair is five feet above the floor.
•
The distance of the portals is 10 feet.
•
The reader is mounted within 20 feet of the antennas (see
Configuration and Optimization
•
Reader power: 30 dBm
•
Reader profile or tag population: Large (see
•
Session: Session 2
General Read Performance Optimization
If too few of the desired tags are read:
•
Turn up the power.
•
Reduce the distance between the antenna and the tags.
If more than the desired tags are read:
•
Turn down the power.
•
Remove stray tags from the target read area.
•
The application may require post filtering of the read data.
Chapter 3, Installation and
Reader Profiles on page
4-27)
Communication).