Turning On; Wearing; Connecting - Xiaomi Mi True Wireless Earphones TWSEJ01JY User Manual

• Checking the battery level of the charging case
Open the charging case cover, or press the function button if the charging case cover is closed:
When the indicator light of the charging case stays lit for 5 seconds, it means the battery is
sufficient.
When the charging case' s indicator light is blinking, it means the earphones' battery level is
low and should be charged immediately.

Turning On

When opening the charging case, the earphones will automatically turn on.

Wearing

1. Take the earphones out of the charging case, and insert them into your ears according to the
left (L) and right (R) marks.
2. You can switch to a different size ear tips to find the ones that suit you most (size M is
installed by default).
Note: After using the earphones, place them back into the charging case. This will extend
their lifespan and help you avoid losing or misplacing them.

Connecting

• Connecting the earphones to a new device
1. Place the earphones into the charging case, then press and hold the function button for
2 seconds. The charging case indicator light will start blinking, indicating that the earphones
are waiting to be connected.
2. Enable the device' s Bluetooth, then locate and connect to "Mi True Wireless Earphones". If a
passcode is requested, enter "0000".
• Connecting to two devices
1. Place one of the earphones into the charging case, then press and hold the function button
for 2 seconds. Use device A to search for and connect to the earphone.
2. After the first earphone is connected to device A, take the earphone out of the charging
case. Now place the second earphone into the charging case and press and hold the
function button for 2 seconds. Use device B to search for and connect to the earphone. This
will connect each earphone to a separate device.
Note: Before using this function, the connection history of each earphone needs to be cleared.
• Connection interrupted
When a device' s Bluetooth is disabled, or if the earphones are out of range, the earphones
will automatically enter awaiting connection mode. If the earphones remain unconnected to
a device for 10 minutes, they will enter sleep mode. Wearing the earphones again will wake
them up and enter awaiting connection mode.
This version is for private use only and should not be distributed.
02