Xiaomi Redmi Buds 3 - Wireless Headphones Manual

Read this manual carefully before use, and retain it for future reference. Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Product Overview

Wearing

• Gently place the earbud into your ear canal, then adjust it to a comfortable position.
• During calls, make sure to point the primary microphone towards your mouth for clearer calls.

Charging

• Before use, please remove the protective film from the contact points on both earbuds and fully charge the charging case and the buds.
• Connect the charging cable to the charging case and keep the earbuds inside the case to charge simultaneously.
• When the charging case is not fully charged, its indicator is white. When it is fully charged, its indicator is off.

Turning On

• When the buds are in the charging case, open the lid to automatically turn them on.
• When putting the earbuds into the charging case while they are turned off, the earbuds will be automatically turned on.

Connection

First time connection

Both earbuds will enter the awaiting connection mode when the charging case's lid is opened. After enabling the phone's Bluetooth, search for and tap 'Redmi Buds 3' to connect the earbuds to the phone.

Note: If the earbuds cannot be connected, place them back into the charging case, close the lid and repeat the above operation.

Reset Earbuds

If the earbuds cannot connect properly, please follow the below steps to reset them.

Open the lid of the charging case and place both earbuds in the case. Press and hold the charging case button for 10 seconds, and the charging case's indicator will blink white for 3 seconds and turn off, indicating the earbuds have been reset successfully (the connection records between the left and right earbuds, and the earbuds and the phone have been cleared).

Function Overview

Answer/End calls

Double tap the left/right earbud's multi-function touch area to answer a call; and tap the left/right earbud's multi-function touch area three times to decline or hang up the call.

Play/Pause Music

Method 1: Remove the earbuds to pause the music and wear the earbuds to start playing the music.*

Method 2: Press and hold the left/right earbud's multi-function touch area to pause/play the audio.

* After manually pausing the music, the music will not play automatically when you remove and wear the earbuds again.

Play next track/previous track

When playing audio, double tap the earbud's multi-function touch area to play the next track; and then tap the earbud's multi-function touch area three times to play the previous track.

Answer a Second Call

Double tap the left/right earbud's multi-function touch area to put the ongoing call on hold and answer the incoming call, and tap the left/right earbud's multi-function touch area three times to hang up the current call and answer the call on hold.

Switch between single/dual bud mode

When both buds are connected successfully, they are in dual-bud mode. If place one of the buds back into the charging case and close its lid, the other bud will automatically enter the single-bud mode. When removing the second bud from the charging case, the dual-bud mode will automatically be restored again.

Fast Pairing

Place the earbuds into the charging case and close its lid. Make the sure the Mi/Redmi phone's Bluetooth is enabled and hold it close to the charging case, then open the case's lid and follow the on-screen instructions to connect the phone to the earbuds.

Note: To use the feature to quickly connect, please update your Mi/Redmi phone to the latest stable version. Then open Additional settings in your phone's Bluetooth settings to enable Pair compatible devices. This feature is currently only supported by some Mi/Redmi phones.

Automatic connection

When the earbuds are in the charging case, opening the lid of the charging case will automatically connect the earbuds to the most recently used Bluetooth device. If the earbuds are not connected to any device, they will automatically enter the awaiting connection state.

Wearing detection

The built-in optical sensor can detect the earbud's wearing state in real-time, it can detect when the earbud is in the ear. For example, if the device the earbuds are connected to is paused, wearing the earbuds will start the music, and removing the earbuds will pause the music.

Note: Once the weather is cold outdoors and your hands become dry, the buds may not function when touching them.

Specifications

Name: Wireless Earphones
Model: M2104E1
Frequency Band: 2402–2480 MHz
Max RF Output Power: < 20 mW

Earbuds

Dimensions: 40.7 × 16.9 × 18.7 mm
Net Weight (per earbud): Approx. 4.47 g
Wireless Range: 10 m (in an obstacle-free environment)
Cell Capacity (per earbud): 35 mAh
Input: 5 V=70 mA
Cell Type: Lithium-ion polymer cell
Wireless Connectivity: Bluetooth 5.2

Charging Case

Model: M2104E1
Dimensions: 49.6 × 49.6 × 24.5 mm
Battery Capacity: 310 mAh
Input: 5 V=500 mA
Output: 5 V=150 mA
Battery Type: Lithium-ion polymer battery

Storage Temperature: 0°C to 45°C
Operating Temperature: 5°C to 40°C
Service Life: 1 year

Important Safety Information

1. Do not attempt to disassemble, repair or modify the product, as this may cause fire or even completely damage the product.
2. Keep the product's indicator away from the eyes of children and animals while the product is in use.
3. Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
4. Do not disassemble, puncture or crush the product nor expose it to fire.
5. Please stop using the product immediately and seek medical assistance if the contact area on your skin shows signs of redness or swelling.
6. To prevent possible hearing loss, do not use high volume for long periods of time.
   
7. This product is not a toy and may contain small parts. Please keep them out of the reach of children.
8. Disposal of a battery into fire or a hot oven or water or other liquids or mechanically crushing or cutting of a battery, that can result in an explosion.
9. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
10. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
11. Product information and certification marks are located in the Charging Case.
12. Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local laws or regulations.
13. Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc).
14. = The symbol indicates DC voltage.
15. This device is equipped with a built-in battery that can not be removed or replaced. Do not disassemble or modify the battery by yourself.
16. Only use certified chargers supplied by qualified manufacturers.

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Dongguan Yingsheng Electronic Technology Co., Ltd. (a Mi Ecosystem company)
Address: Suite 204, 4th Block, No. 86 Hongtu Road, Nancheng District, Dongguan, Guangdong, China.

User Manual Version: V1.0
For further information, please go to www.mi.com

Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz