Aruba 303H Series Installation Manual

Aruba 303H Series Hospitality Access Points

Installation Guide

The Aruba 303H Series access point is a high-performance dual-radio wireless device for hospitality and branch
deployments.
This access point use Multiple-Input, Multiple-Output (MIMO) technology to provide secure wireless connectivity
for both 2.4GHz 802.11 b/g/n and 5GHz 802.11 a/n/ac WiFi.
Alternatively, the wired Ethernet ports located on the bottom of the device allow users to connect to the device
directly when linked by an Ethernet cable.
The 303H Series access point can be attached to a standard single-gang wall box using the mount provided, or
converted into a desk-mounted remote access point for branch office deployments using the AP-303H-MNTD
mount kit (sold separately).
The 303H Series access point provides the following capabilities:
IEEE 802.11a/b/g/n/ac operation as a wireless access point

IEEE 802.11a/b/g/n/ac operation as a wireless air monitor

Compatibility with IEEE 802.3af/at PoE

Central management configuration

Supports PoE-in (E0 port)/PoE-out (E3 port)

Support for selected USB peripherals

Integrated Bluetooth Low Energy (BLE) radio


Package Contents

303H Series Access Point

Single gang wall-box mounting bracket

(2x) #6-32 slotted screws

T8H Torx security screw

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to repack and return the unit to the supplier if needed.

Hardware Overview

The following sections outline the hardware components of the 303H Series access point.
Figure 1
AP-303H-IG-01 | September 2017
303H Series (front view)
PoE-PSE Status
Radio Status
System Status
1