Wouxun KG-UV6D User Manual page 27

Reset ------ MENU 30
This transceiver has two selections for the reset operation-VFO reset and ALL reset.
VFO reset means that all the functional parameter set in frequency mode resume to the factory setting.
ALL reset means that all the functional parameter set in both frequency mode and channel mode resume
to the factory setting.
1. VFO Reset
In standby, press m + n , the screen displays .
press W to enter, and press u / "to select VFO,
press [Em again to confirm, and the screen displays
After this operation, the transceiver will be resumed automatically.
2. ALL Reset
In order to avoid the faulty operations, we suggest that you set the password for the ALL Reset via
KG-UV6D programming software. Only input the valid password, the transceiver can be reset to the
factory setting completely. Pls see the password setting in the programming software, which is consist of
six arabic numerals selectable from O to 9.
When the password is "000000", it means no password needed to input for this operation.
40
(1) Setting password as "000000"
When the reset is done, the transceiver will be resumed automatically.
(2) Setting password as "XXXXXX" (E.g.:123456)
press m to enter, and press u / D to select ALL, press m , the screen will displays
then the transceiver will start resetting. After reset is done, the transceiver will be resumed
automatically.
41